- ページ 18

スイッチ HP StorageWorks FC Entry Switch 8BのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HP StorageWorks FC Entry Switch 8B 44 ページ。 Isl trunking user's guide (version 3.0)
HP StorageWorks FC Entry Switch 8B にも：ユーザーマニュアル (44 ページ), ユーザーマニュアル (38 ページ), ユーザーマニュアル (38 ページ), ユーザーマニュアル (37 ページ), ユーザーマニュアル (30 ページ)

Using Zoning

A zone is a group of devices that can communicate with each other. Zone membership can include

ports, WWNs, or aliases, or any combination of these. A device can be included in more than one

zone.

To define a zone, specify the list of members to be included and assign a unique zone name; the

zone name must be a unique alpha-numeric string beginning with an alpha character. The

underscore character ( _ ) is allowed and zone names are case-sensitive. For example,

green_zone is not the same name as Green_Zone.

Specify zone members by port number, WWN, alias, or a combination of any of the above.

To specify by port number, you must specify switch domain ID and port number, for example,

2,12 indicates switch domain ID 2, port number 12. When a member is specified by port number all

devices connected to the port are included in the zone.

To specify by WWN, specify node name or port name as an 8- hex number separated by colons, for

example, 10:00:00:00:60:69:00:8a. These eight numbers are compared to the node and

port name presented in a login frame (FLOGI or PLOGI). When a zone member is specified by

node name, all ports on the device are included in the zone. When a zone member is specified by

port name, only that port on the device (node) is included in the zone. To obtain the WWN of a

device for each port, use the switchShow command.

To specify by alias, specify the alias name.

Zone members can also be designated by a combination of these methods. For example, the

following zone definition

2,12; 2,14; 10:00:00:60:69:00:00:8a; nt_hosts

contains any devices connected to switch 2, ports 12 and 14, the device with a node name or port

name of 10:00:00:60:69:00:00:8a as well as devices associated with the alias

nt_hosts. Aliasing component devices does not affect hardware security.

Define Zone Configuration

A zone configuration is a group of zones that are enforced whenever that zone configuration is

enabled. A zone can be included in more than one zone configuration.

To define a zone configuration, specify the list of zones to be included and assign a zone

configuration name; the zone configuration name must be a unique alpha-numeric string beginning

with an alpha character. The underscore character ( _ ) is allowed and zone names are

case-sensitive. For example, configuration1 is not the same name as Configuration1.

Enable Zone Configuration

To enable a zone configuration, select the zone configuration to be enabled. The configuration is

downloaded to the switch hardware. RSCNs are sent to all fabric devices registered for state

changes notifying these devices to re-query the name server to discover available devices that can

be accessed.

Modifying Configurations

To make changes to an existing configuration, add, delete, or remove individual elements to create

the desired configuration. Once the changes have been made, save the configuration. This ensures

the configuration is permanently saved in the switch and it also ensures that the configuration is

replicated throughout the fabric.

3-6

Zoning User's Guide