- ページ 6

スイッチ HP XP20000/XP24000のPDF 統合マニュアルをオンラインで閲覧またはダウンロードできます。HP XP20000/XP24000 29 ページ。 Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
HP XP20000/XP24000 にも：リリースノート (13 ページ), リリースノート (4 ページ), 管理者マニュアル (50 ページ), 設定マニュアル (42 ページ), 設定マニュアル (40 ページ), 設定マニュアル (40 ページ), 設定マニュアル (36 ページ), 設定マニュアル (36 ページ), 設定マニュアル (30 ページ), 設定マニュアル (36 ページ), リリースノート (5 ページ), 設定マニュアル (46 ページ), 設定マニュアル (46 ページ), リファレンス・マニュアル (46 ページ), 設定マニュアル (40 ページ), 設定マニュアル (44 ページ), 設定マニュアル (38 ページ), 設定マニュアル (34 ページ), 設定マニュアル (30 ページ), 設定マニュアル (30 ページ)

2 Prerequisites

This section lists the prerequisites that are required before deploying the plug-in.

The plug-in host requires the Oracle Enterprise Manager Command Line Interface (EMCLI) and HP

RAID Manager library.

EMCLI installation and configuration

The EMCLI must be installed on the plug-in host. Installation and user documentation is available

from Oracle at:

http://www.oracle.com/technetwork/indexes/documentation/index.html

On the plug-in host, download the EMCLI client kit from the Grid Control installation. Ensure

that the host is equal to where the OMS is installed. A sample command follows:

HTTP(S)://host:port/em/console/emcli/download The emclikit.jar

The emclikit.jar file is located in the $ORACLE_HOME/sysman/jlib directory of the

Grid Control Oracle Management Server home.

NOTE:

-url=http://myworkstation.us.oracle.com:em_port/em -username=em_user.

After a successful installation, the Emcli Setup Successful message appears.

RAID Manager library installation and configuration

Ensure that the latest RAID Manager library is installed on the plug-in host.

The RAID Manager library command devices must be configured and presented to this host.

The plug-in executable uses the RAID Manager library interface to gather information from

the XP disk array.

If the plug-in monitors multiple disk arrays one command device for each disk array must be

presented to the host. Only one command device must be configured from each disk array.

Command device ownership to the Oracle agent user account must be provided for read and

write access. For example for the command device:

/dev/rdsk/cxtydz

Use the following HP-UX command to provide access:

# chown oracle:dba /dev/rdsk/cxtydz

# chmod 660 /dev/rdsk/cxtydz

Ensure that the managed hosts have unique node names and current HP–UX patches.

Unique node names

All the nodes managed by the Oracle Enterprise Manager need a unique node name. Use

the HP-UX command:

uname -n

on all the nodes to ensure the names are unique.

Prerequisites

Enter the following to set up the EMCLI: ./emcli setup