- ページ 8

スイッチ HP XP20000/XP24000のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。HP XP20000/XP24000 44 ページ。 Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
HP XP20000/XP24000 にも：リリースノート (13 ページ), 統合マニュアル (29 ページ), リリースノート (4 ページ), 管理者マニュアル (50 ページ), 設定マニュアル (42 ページ), 設定マニュアル (40 ページ), 設定マニュアル (40 ページ), 設定マニュアル (36 ページ), 設定マニュアル (36 ページ), 設定マニュアル (30 ページ), 設定マニュアル (36 ページ), リリースノート (5 ページ), 設定マニュアル (46 ページ), 設定マニュアル (46 ページ), リファレンス・マニュアル (46 ページ), 設定マニュアル (40 ページ), 設定マニュアル (38 ページ), 設定マニュアル (34 ページ), 設定マニュアル (30 ページ), 設定マニュアル (30 ページ)

Multimode optical cables with SC or LC connectors

Public or private arbitrated loop (FC-AL) or direct fabric attach

Fibre Channel switches

Even though the interface is Fibre Channel, this guide uses the term "SCSI disk" because disk array

devices are defined to the host as SCSI disks.

Device emulation types

The XP family of disk arrays and the SVS 200 support these device emulation types:

OPEN-x devices: OPEN-x logical units represent disk devices. Except for OPEN-V, these devices

are based on fixed sizes. OPEN-V is a user-defined size based on a CVS device. Supported

emulations include OPEN-3, OPEN-8, OPEN-9, OPEN-E, OPEN-L, and OPEN-V devices.

LUSE devices (OPEN-x*n): Logical Unit Size Expansion (LUSE) devices combine 2 to 36 OPEN-x

devices to create expanded LDEVs larger than standard OPEN-x disk devices. For example, an

OPEN-x LUSE volume created from ten OPEN-x volumes is designated as OPEN-x*10.

CVS devices (OPEN-x CVS): Volume Size Configuration (VSC) defines custom volumes (CVS) that

are smaller than normal fixed-sized logical disk devices (volumes). (OPEN-V is a CVS-based custom

disk size that you determine. OPEN-L does not support CVS.) Although OPEN-V is a CVS-based

device, the product name in the SCSI inquiry string is OPEN-V opposed to the fixed size OPEN-

[389E] devices that appear as OPEN-x-CVS.

LUSE (expanded) CVS devices (OPEN-x*n CVS): LUSE CVS combines CVS devices to create an

expanded device. This is done by first creating CVS custom-sized devices and then using LUSE to

combine from 2 to 36 CVS devices. For example, if three OPEN-9 CVS volumes are combined to

create an expanded device, this device is designated as OPEN-9*3-CVS. OPEN-V devices are

designated as OPEN-V*n (without CVS).

NOTE:

For the SVS 200, and the XP24000/XP20000/XP12000/XP10000 when connected to external

storage devices, HP recommends using OPEN-V as the emulation the array makes visible to the host.

This allows configuration of external storage LDEVs without losing data. Using any other emulation

might cause data loss in the external storage LUNs. For new deployments, use OPEN-V, because

some features (such as HP StorageWorks XP Snapshot Software or HP StorageWorks XP Continuous

Access Journal Software) are only supported with OPEN-V.

For detailed information, see

The disk arrays support many standard software products that provide host, application, or I/O path

failover and management.

The XP family of disk arrays and the SVS 200 support standard SNMP for remotely managing arrays.

The SNMP agent on the SVP performs error-reporting operations requested by the SNMP manager.

SNMP properties are usually set from the SVP but they can also be set remotely using P9000 or XP

Command View Advanced Edition Software or XP Remote Web Console. For specific procedures,

see the applicable user guide.

Installing and configuring Novell NetWare for the XP family of disk arrays

"Emulation

specifications" on page 33.