- ページ 18

プロジェクター Panasonic et-jpc100weのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Panasonic et-jpc100we 28 ページ。

Installation (continued)

Changing the orientation of the main unit of the projector.

This section describes changing the orientation of the main unit of the projector to make the mounting work of the

projector mount bracket easier to do.

Rotating ﬁ xing

4) Tighten the ﬁ xing screw.

 Tighten the rotating ﬁ xing screw with the allen wrench (3.0 mm [1/8"] across ﬂ ats) supplied with the

projector to prevent the main unit moving during the mounting work.

Note

 The rotating ﬁ xing screw is a hexagon socket head screw (M6). Take care because it will come out of the

projector if loosened too much.

18 - ENGLISH

screw

Shaft holder

Main unit

1) Place the projector on a cloth or the like that

has been laid on a ﬂ at surface.

2) Loosen the ﬁ xing screw.

 Loosen the rotating ﬁ xing screw of the projector

with the allen wrench (3.0 mm [1/8ʺ] across

ﬂ ats) supplied with the projector.

3) Change the orientation of the main unit.

 Loosening the rotating ﬁ xing screw enables

rotation of the shaft holder so that the

orientation of the main unit can be changed.