- ページ 19

プロジェクター Panasonic ETJPC200WUのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Panasonic ETJPC200WU 30 ページ。

Installation (continued)

Changing the orientation of the main unit of the projector

This section describes changing the orientation of the main unit of the projector to make the installation work

much easier.

Ball joint fixing screw

Ball joint stopper

Shaft holder

1) Place the projector on a cloth or the like that

has been laid on a flat surface.

2) Loosen the ball joint fixing screw.

z Loosen the ball joint fixing screw of the

3) Change the orientation of the main unit.

z Loosening the ball joint fixing screw enables

Main unit

4) Tighten the ball joint fixing screw.

z Tighten the ball joint fixing screw with the allen

Attention

z When loosening the ball joint fixing screw with the

pole being held by hand, take care to avoid the

hand(s) or fingers being pinched between the pole

and the main unit.

projector with the allen wrench (5.0 mm (3/16ʺ)

across flats) supplied with the projector.

rotation of the shaft holder so that the

orientation of the main unit can be changed.

wrench (5.0 mm (3/16") across flats) supplied

with the projector to prevent the main unit

moving during the mounting work.

ENGLISH - 19