- ページ 9
プロジェクター Panasonic ETJPC200WUのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Panasonic ETJPC200WU 30 ページ。
ページを印刷する
Before installation
Items to prepare
The items that you need to provide in advance in addition to the supplied parts to mount this product to a wall or
ceiling are as follows.
This product is a tool used for mounting the projector (optional) to a wall or ceiling. Use it to
install a compatible projector.
Compatible projectors: PT-JX200FBE / PT-JX200FWE
The following parts are required when mounting the attachment plate to a wall or ceiling.
Please prepare the suitable commercially available products depending on the structure of
the wall or ceiling and the installation method.
The number enclosed in < > is the quantity.
Structure of mounting area
For the wall or ceiling with wooden
reinforcement
For concrete beams or alike
(Bolt diameter: M10)
For wooden beams or alike
(Bolt diameter: M10)
A work bench and a soft cloth to prevent scratches are necessary when mounting the
projector mount bracket to the projector.
Prepare a bench for the mounting work with a height of at least 250 mm (9-27/32") and lay a soft cloth or the
like below the projector to prevent scratches.
Disposal
When disposing of this product, ask your local authority or dealer about the correct disposal method.
Ensure there will be thread engagement of at least 20 mm
(25/32") in the wall or ceiling reinforcement member; (round
head) wood screws with nominal diameter of 4.1 mm (5/32")
<5> and 3.1 mm (1/8") <4>
Hanging bolt <2>
Hexagonal nut <6>
Flat washer <6>
Spring washer <4>
Anchor nut or curled plug <2>
Hanging bolt <2>
Hexagonal nut <8>
Flat washer <8>
Spring washer <4>
Main unit
Bench to adjust height
Soft cloth or alike
(If necessary, use a plate or corrugated
paper, etc.)
Commercially available parts
Power supply unit
Soft cloth or alike
Work bench
(Table or box, etc.)
Base
ENGLISH - 9