- ページ 5

プロジェクター Panasonic PT-AE1000のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic PT-AE1000 28 ページ。 Panasonic lcd projector operating instructions
Panasonic PT-AE1000 にも：取扱説明書 (28 ページ)

ページを印刷する

HHP

■

wmi

Sllliilllv

■II

■

g|?§/,

iiSi

Do not cover the air inlet port or the air outlet port.

Do not mix old and new batteries.

• Doing so may cause the projector to overheat, which

If the batteries are inserted incorrectly, they may

can cause fire or damage to the projector.

explode or leak, and fire, injury or contamination of

• Do not P|ace the projector in narrow, badly ventilated

the battery compartment and surrounding area may

places such as closets or bookshelves.

result.

• Do not place the projector on cloth or papers, as

these materials could be drawn into the air inlet port.

Do not put your weight on this projector.

• You could fall or the projector could break, and injury

Do not set up the projector in humid or dusty places

may result.

or in places where the projector may come into

• Be especially careful not to let young children stand

contact with oily smoke or steam.

or sit on the projector.

• Using the projector under such conditions may result

in fire, electric shocks or plastic deterioration. The

If not using the projector for an extended period of

plastic deterioration may cause the falling down of

time, disconnect the mains plug from the mains

the projector which is mounted in the ceiling.

socket.

• If dust builds up on the mains plug, the resulting

When disconnecting the mains lead, hold the plug,

humidity may damage the insulation, which could

not the lead.

result in fire.

• If the mains lead itself is pulled, the lead will become

damaged, and fire, short-circuits or serious electric

Disconnect the mains plug from the mains socket

shocks may result.

as a safety precaution before carrying out any

cleaning.

Always disconnect all cables before moving the

• Electric shocks can result if this is not done

projector.

• Moving the projector with cables still attached can

If the lamp has broken, ventilate the room

damage the cables, which could cause fire or electric

immediately. Do not touch or bring your face close

shocks to occur.

to the broken pieces.

• Failure to observe this may cause the user to absorb

Do not place any heavy objects on top of the

the gas which was released when the lamp broke

projector.

and which contains nearly the same amount of

• Failure to observe this may cause the projector to

mercury as fluorescent lamps, and the broken pieces

become unbalanced and fall, which could result in

may cause injury.

damage or injury.

• if you believe that you have absorbed the gas or that

_ .

the gas has got into your eyes or mouth, seek

Do not short-circuit, heat or disassemble the

medical advice immediately

batteries or place them into water or fire.

• Ask your dea|er about the replacement of the lamp

• Failure to observe this may cause the batteries to

unit and check the inside of the projector,

overheat, leak, explode or catch fire, and burns or

other injury may result.

Ask an Authorised Service Centre to clean inside

....

the projector at least once a year.

When inserting the batteries, make sure the

. If dust is left to build up inside the projector without

po anhes (+ and -) are correct.

being c|eaned out, it can result in fire or problems

• If the batteries are inserted incorrectly, they may

with operation

explode or leak, and fire, injury or contamination of

• |t is a good idea to clean the inside of the projector

the battery compartment and surrounding area may

bef0re the season for humid weather arrives. Ask

resu 1

your nearest Authorised Service Centre to clean the

Use only the specified batteries

projector when required. Please discuss with the

• If incorrect batter.es are used, the, may explode or

Authorised Sendee Centre regard,ng cleaning costs

leak, and fire, injury or contamination of the battery

compartment and surrounding area may result.

We are constantly making efforts to preserve and maintain a clean environment. Please take non repairable

units back to your dealer or a recycling company.

8 - English

Make sure the following accessories are provided with your projector._

Remote control

(EUR7914Z40 x 1)

AA batteries for

Remote control

(x 2)

m f'

i t

B1E3C3

223 jlENSj

jASPEcj FtuCtfl

Mains lead

for continental Europe (K2CM3FZ00003 x 1)

Mains lead

for UK (K2CT3FZ00003 x 1)

Cautions when transporting

Do not subject the projector to excessive vibration

or shocks.

• The projector lens need to be handled with care.

• Cover the lens with the lens cover when transporting

the projector.

When transporting the projector, hold the body at

the bottom securely.

® Do not hold the adjuster legs or the top cover to

move the projector, as this may damage the

projector.

Cautions when installing

Avoid setting up in places which are subject to

vibration or shocks.

• The internal parts can be damaged, which may

cause malfunctions or accidents.

Avoid setting up in places which are subject to

sudden temperature changes, such as near an air

conditioner or lighting equipment.

• The life of the lamp may be shortened or the

projector may be turned off. See "TEMP indicator" on

page 40.

Do not set up the projector near high-voltage power

lines or near motors.

• The projector may be subject to electromagnetic

interference.

If installing the projector to the ceiling, ask a

qualified technician to carry out all installation

work,

• You will need to purchase the separate installation kit

(Model No. ET-PKX100, ET-PKE1000S).

Furthermore, all installation work is better to be

carried out by a qualified technician.

If using this projector at high elevations

(above 1 400 m), set the ALTITUDE to HIGH. See

"ALTITUDE" on page 39.

• Failure to observe this may result in malfunctions or

the life of the lamp or the other components may be

shortened.

English