- ページ 6

プロジェクター Panasonic PT-AE1000EのPDF リモコン操作マニュアルをオンラインで閲覧またはダウンロードできます。Panasonic PT-AE1000E 16 ページ。 Panasonic lcd projector operating instructions
Panasonic PT-AE1000E にも：取扱説明書 (28 ページ)

ページを印刷する

Setting remote control signals

for home theatre systems

Learning remote control signals directly from

home theatre system devices

Operations can be learnt for buttons one by one.

Note:

Remote control signals that are not infrared-type (wave

format) signals cannot be recorded.

It may not be possible to record some types of signal.

There is a limit to the number of buttons that can be learnt.

The maximum number will vary depending on the remote

control signals that are learnt, but generally the maximum

number of keys that can be learnt is about 80.

It may not be possible to learn remote control signals

correctly if the remote control's batteries are nearly spent.

Using the learning function

Press "LEARN" for 3 seconds or more and

then press "ENTER".

Press "DEVICE"to select the home theatre

system device to be set.

Place the projector's remote control next to

the emitter of the home theatre system's

remote control.

Press the button on the projector's remote

control that you would like to learn, and

after "LEARNING?" is displayed, press the

corresponding button on the home theatre

system device's remote control.

(

( )

Home theatre system's

Projector's

remote control

Example: When learning the

(

function of the playback button

If "ERROR" is displayed.

To learn another button, repeat step 4.

If an operation macro has been assigned to the function button,

signals cannot be learnt for that button.

If "ERROR" is displayed, return to step 4.

To finish, press "SETUP", and then check

operation.

6 - E

NGLISH

(Example: When "DVD" is selected)

Approx.

5 cm

)

After

5 seconds

)

Note:

If the batteries of the remote control are spent, the signals

will not be recorded correctly.

If no operations are carried out for 60 seconds or more

during learning, the setting mode will be cancelled. To

carry out learning correctly, repeat the procedure from

step 1.

When function buttons A/B/C have been learnt, "-A-, -B-,

-C-" will be displayed, and you can edit the characters that

are displayed here.

(

p.14)

Tips on correct learning

Do not move the remote control while learning is in

progress.

Place fresh batteries into both the projector's

remote control and the other remote control before

starting.

Avoid carrying out the procedure in places that are

exposed to direct sunlight or lights. (Interference

may occur and cause errors in learning.)

The position of the emitter will vary depending on

the shape of the remote control. Place the

projector's remote control correctly in front of the

emitter, and at a distance of 5 cm.