- ページ 11
プロジェクター Panasonic PT-AE200EのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic PT-AE200E 34 ページ。 Lcd projector
ページを印刷する
Example of connecting to computer
Computer
To audio
To DVI-D
output
output
NOTE:
B It is better to shut down the computer before turning off the MAIN POWER
switch of the projector.
B Refer to the list of compatible signals on page 61 for the types of RGB
signals which can be input to the projector by connecting a computer.
B Only one audio system circuit is available for the AUDIO IN L-R jacks, so if
you wish to change the audio input source, you will need to remove and
insert the appropriate plugs.
B The PT-AE200E does not have a DVI-D input (DVI-D IN) connector.
20-E
NGLISH
Computer
To audio
To RGB
output
output
* This illustration is an example of
connection for the PT-AE300E.
Setting-up
Projection methods
The projector can be set up so that any one of the following four projection
methods can be used. Select whichever projection method matches the
setting-up method. (The projection method can be set from the OPTION
menu. Refer to page 40 for details.)
FRONT
FRONT/REAR
REAR
NOTE:
B You will need to purchase the separate ceiling bracket (ET-PKE300) when
using the ceiling installation method.
Projector position
The projection range of this projector is 1.2 m – 7.4 m.
The lower edge of the projected image falls about 0.1 m from the centre of
the lens.
For details about projected image distances, refer to page 65.
Diagonal length
Screen Size
(16:9)
Height
Projection
Width
Distance
Minimum Distance
Maximum Distance
DESK/CEILING
DESK
CEILING
(Factory default setting)
Projection Distance
40
˝
60
˝
80
˝
100
˝
150
˝
0.5 m
0.8 m
1.0 m
1.3 m
1.9 m
(1´7˝)
(2´7˝)
(3´3˝)
(4´3˝)
(6´2˝)
0.9 m
1.3 m
1.8 m
2.2 m
3.3 m
(2´11˝)
(4´3˝)
(5´10˝)
(7´2˝)
(10´9˝)
1.2 m
1.9 m
2.5 m
3.1 m
4.7 m
(3´11˝)
(6´2˝)
(8´2˝)
(10´2˝)
(15´5˝)
(20´4˝)
1.4 m
2.2 m
2.9 m
3.7 m
5.6 m
(4´7˝)
(7´2˝)
(9´6˝)
(12´1˝)
(18´4˝)
(24´3˝)
E
NGLISH
200
˝
2.5 m
(8´2˝)
4.4 m
(14´5˝)
6.2 m
7.4 m
-21