- ページ 29
プロジェクター Panasonic PT-AE4000EのPDF 機能説明をオンラインで閲覧またはダウンロードできます。Panasonic PT-AE4000E 50 ページ。 Full high-definition home cinema projector
Panasonic PT-AE4000E にも： 取扱説明書 (36 ページ), 機能説明 (50 ページ), パンフレット＆スペック (6 ページ)
ページを印刷する
Saving a log setting as a profile
Return to the COLOUR MANAGEMENT menu
and save the stored log as a profile. Make sure
that the PICTURE MODE is not switched.
1.
Select the
PROFILE SAVE menu and press the
ENTER button.
The PROFILE SAVE menu is displayed. You can
save the profile as USER1, USER2 and USER3.
USER1
USER2
USER3
Indicated with
is in use, and
2.
Press the
ENTER button to save the profile.
The confirmation screen is displayed. Press the
ENTER button again to save.
3.
Name the profile.
Use ▲ ▼ ◄ ► to specify the location of the required
character to enter and press the ENTER button.
You can enter up to 14 characters.
PROFILE NAME INPUT
OK
4.
Repeat step 3 until you finish the text line.
Move cursor to ALL DELETE and press the ENTER
button to delete all the entered text line.
Press the DEFAULT button to delete the last entered
character or indicated with cursor in the text box.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press ▼ then perform step 3.
5.
Select
OK and press the ENTER button to set the
entered text as a name.
Press the ENTER button without entering any text to
keep the default name.
Deleting the saved profiles
You can delete the profiles from PROFILE
DELETE menu.
1.
Select
PROFILE DELETE and press the ENTER
button.
2.
Press ▲ ▼ to select the required profile or
ALL DELETE and press the ENTER button.
The confirmation screen will be displayed and select
OK.
3.
Press the
ENTER button.
is empty.
ALL DELETE
CANCEL
PROFILE
Changing the profile names
You can change the name of the profiles from the
PROFILE NAME CHANGE menu.
1.
Press ▲ ▼ to select
and press the ENTER button.
2.
Press ▲ ▼ to select the required profile and press
the ENTER button.
3.
Rename the profile.
Use ▲ ▼ ◄ ► to specify the location of the required
character to enter and press the ENTER button.
4.
Select
OK and press the ENTER button to set the
entered text as a name.
Loading saved profiles
When profiles are loaded under the PICTURE
MODE setting, you can keep them as you defined
until the PROFILE is set to NORMAL.
1.
Select the required
PICTURE MODE and press
the ENTER button.
2.
Press the
COLOUR MANAGEMENT button and
select the PROFILE menu.
The profile settings of the selected PICTURE MODE
will be displayed.
3.
Select the required profile and press the
button.
Return to the default setting of the
NORMAL
PICTURE MODE menu.
USER1
USER2
Defined profile settings.
USER3
NOTE:
•
In the
CURSOR mode, you can adjust the colours
except white, gray and black.
•
In the
CURSOR mode, if you adjust the exact same
colour differently, both will affect each other and you
might get unexpected results.
•
COLOUR MANAGEMENT
the setting of COLOUR1 in PICTURE MODE, when
HDMI signal is selected.
•
If there is another area, which has an exact same or
similar colour with your target in the same screen, all
colours will be adjusted as well.
•
If you switch the input signal before you save the
profile, the setting will be cancelled without notice.
J x.v.Colour
You can switch on/off the automatic adjustment
system for signals which comply with International
Standard xvYCC.
ON:
Active
OFF:
Deactive
NOTE:
•
x.v.Colour
adjustment system is available only with
HDMI signals in COLOUR1 of PICTURE MODE menu.
PICTURE menu
PROFILE NAME CHANGE
ENTER
will be unable to adjust with
E
NGLISH - 29