- ページ 5

プロジェクター Panasonic PT-AE900UのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic PT-AE900U 14 ページ。 High definition home cinema projector
Panasonic PT-AE900U にも：取扱説明書 (36 ページ), パンフレット＆スペック (10 ページ), パンフレット＆スペック (2 ページ)

ページを印刷する

Setting remote control signals for home theatre systems

I Selecting and entering device codes

Note:

BFor device codes that have a power remote control signal, the power remote

control signal for the device will be transmitted when the device code is

selected. Turn the power for the device on as a test.

BTwo or more equipment codes cannot be entered for the same device.

BDevice codes cannot be entered for "PJ".

BIf the home theatre system device does not support this function, it will not

operate when the buttons are pressed.

Press [SETUP] for 3 seconds or more.

Select the device to be set and then press [ENTER].

B When "DVD, VCR, AMP" is selected

B When "TV/TNR" is selected

Select the device to be set

-1

and then press [ENTER].

Continue to step

SAT

CBL

Continue to step

B When "USER 1-3" is selected

Press [ENTER].

-1

Select the device to be set.

-2

✱ If "ERROR" is displayed

The remote control signal that you are trying to learn has

already been registered, so the device code cannot be

selected. To set a device code, clear the remote control signal

that has been learnt. (

Select the desired device code while referring to the device

code list (

p.24, 25), and then press [ENTER].

When "USER 1-3" is selected

Press [SETUP] to finish.

Note:

B If correct operation is not possible

If you find several code numbers when referring to the device code list, try

setting one of the other numbers instead.

DVD

HVAC

VCR

CBL

SAT

p.14)

RCV

AMP