- ページ 31

プロジェクター Panasonic PT-DZ6700EのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic PT-DZ6700E 42 ページ。 Brochure
Panasonic PT-DZ6700E にも：パンフレット＆スペック (6 ページ), パンフレット＆スペック (6 ページ)

ページを印刷する

1. Replacing the Lamp Unit

 Replacement procedure

 Removing and replacing the lamp unit

1. Use a Phillips-head screwdriver to loosen the

"lamp unit cover fixing screw" (1 screw) on the

back of the projector until the screws turn freely,

and remove the lamp unit cover.

 Slide the lamp unit cover to the control buttons and

pull to remove.

Lamp unit cover

fixing screw

Lamp unit cover

2. Use a Phillips-head screwdriver to remove the

"lamp unit fixing screws" (3 screws).

3. Hold the handles of the lamp unit and pull the used

lamp unit gently from the projector.

Lamp unit fixing screws

Handle

NOTE:

• The lamp unit and the lamp unit cover must be attached correctly and securely. Failure to do so, the projector will bot be turned on for the

protection circuit.

• When the lamp unit is replaced, the duration of usage time will be reset to "0".

Handle

Lamp unit fixing screws

4. Hold the handle of the new lamp unit and replace it

in correct direction.

5. Press in the lamp unit until it clicks and make sure

the unit is installed securely.

6. Tighten the "lamp unit fixing screws" (3 screws)

securely with a Phillips-head screwdriver.

7. Attach the lamp unit cover and tighten the "lamp

unit cover fixing screw" (1 screw) securely with a

Phillips-head screwdriver.

 Slide the lamp unit cover to the hinge side along the

guide and push in to attach securely.

 Make sure the fan electric power connector of the

lamp unit cover is inserted securely to the projector's

connector.

Replacement

Fan electric power

connector

NGLISH - 31