- ページ 2

ソウ Diamond Tech International Power Miter IIのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Diamond Tech International Power Miter II 9 ページ。 Chop saw

Safety Instructions for Miter Saw

Safety is a combination of common sense, staying alert and knowing how your miter saw

works. Read this manual to understand this miter saw.

Reduce the Risk of Dangerous Environment:

• Use the miter saw in a dry place protected from rain.

• Keep work area well lighted.

• Place the saw so neither the user nor bystanders are forced to stand in line with blade.

Thrown debris could injure people in it's path.

To reduce the risk of injury from unexpected saw movement:

• Put the miter saw on a firm level surface where there is plenty of room for handling and properly

supporting the workpiece.

• Support the miter saw so the table is level and the saw does not rock.

• Bolt or clamp the miter saw to its support.

Motor

Blade Adjustment Screw

Return Spring

Guard

Miter/Angle Guide

1. Read the manual before using this saw.

2. Wear safety goggles that meet ANSI Z87.1 or in Canada CSA Z94-3-88 Standards.

3. Tighten Blade Retaining Nut and all parts before sawing.

4. Do not operate the saw without guards in place.

5. Keep hands away from the moving blade.

6. Do not perform any operation freehand.

7. Do not reach around or behind saw blade.

8. Unplug saw before changing blade or servicing.

9. Release trigger and wait for blade to stop before moving workpiece or changing setup.

10. Do not expose to rain or use in damp locations.

11. Plug power cord into a properly grounded outlet protected by a 15 amp circuit

breaker or time delay fuse. In Canada use time delay fuse marked "D".

• For extra stability - Drill holes into your workbench to accommodate the rubber feet of the

Power Miter II Saw, or remove the feet and bolt your saw directly to your workbench.

• This saw is designed to cut soft metals (lead, zinc, brass, aluminum) and soft wood. It is not

designed to cut steel or thick materials.

WARNING

Drive Belt Cover

Power Switch

Blade Cover

Blade Retaining Nut

Blade