- ページ 2
プロジェクター Panasonic PT-F100NTのPDF 仕様をオンラインで閲覧またはダウンロードできます。Panasonic PT-F100NT 16 ページ。 Lcd projector
Panasonic PT-F100NT にも： セットアップおよび操作マニュアル (37 ページ), 寸法 (1 ページ), スペックファイル (12 ページ)
ページを印刷する
Using the Serial Terminals
1. Basic Format
Transmission from the computer begins with STX, then the command, parameter and ETX are sent in this
order. Add parameters according to the details of control.
Basic control command (without parameter)
Start
Command
(STX)
1 byte
3 bytes
Basic control command (with parameters)
Start
Command
(STX)
1 byte
3 bytes
Response (Callback) of the basic control command
In the period when the command can be accepted
Differs according to each command.
In the period when commands cannot be accepted or the command does not exist
Hexadecimal
Character
In case of the parameter error
Hexadecimal
Character
Notes:
• When sending several commands, be sure to wait for a response from the projector, and send the next
command after 0.5 seconds or more pass.
• It might take time by the time the response returns because the command is processed in the projector.
Set the time-out to 10 seconds or longer.
End
(ETX)
1 byte
Separator
Parameters
(colon)
1 byte
Undefined length
02h
45h
52h
E
R
02h
45h
52h
E
R
2/16
End
(ETX)
1 byte
34h
30h
31h
4
0
1
34h
30h
32h
4
0
2
03h
03h