- ページ 22

プロジェクター Panasonic PT-F200NTEAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Panasonic PT-F200NTEA 49 ページ。 Secondary display transmission function
Panasonic PT-F200NTEA にも：パンフレット＆スペック (6 ページ), クイックマニュアル (1 ページ), クイックマニュアル (1 ページ), 上級操作マニュアル (33 ページ)

Various projection methods

Live mode

Connect a computer to a projector, and display the computer screen over the entire projection screen.

Check the status indication in the menu bar to make sure that transmission is

possible (check that the green lamp is lit).

Click [Live Mode] from the menu.

The current computer screen is transmitted to the selected projector. In the live mode the projector is occupied by a

single computer, so operations from other computers are not possible.

Picture quality and other options can be set on the <Option> window by clicking [OPTION...] from the menu.

• For presentations in live mode, the [PAGE

Page Up and Page Down keys. This means that if you run a computer application that supports the Page Up and Page Down

keys, the presentation screen can be changed using the remote control.

• If the connection error occurs during projection, the message [Stop "Live mode"] will appear, then restart projection from menu.

• Set the [LIVE MODE CUT IN] of the unit to [ON] in advance to enable a different computer to interrupt and project images in

live mode. (See page 33)

Notes on sharing projectors with Windows PCs

After selecting a projector, the live mode screen cannot be projected in the below index style.

In this case, use the [MULTI-LIVE] button on the remote control to cancel the index style.

Quitting live mode

Click [Live Mode] in the menu again.

(cont.)

] buttons on the remote control will function in the same way as the computer's