- ページ 32
プロジェクター Panasonic PT-L780NTEのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic PT-L780NTE 36 ページ。 Wired and wireless/portable projector
Panasonic PT-L780NTE にも： 取扱説明書 (36 ページ), パンフレット＆スペック (4 ページ)
ページを印刷する
Cleaning and replacing the air filter
If the air filter becomes clogged with dust, the internal temperature of the
projector will rise, the TEMP indicator will flash and the projector power will
turn off. The air filter should be cleaned every 100 hours of use,
depending on the location where the projector is being used.
Cleaning procedure
# Turn off the MAIN POWER
switch and disconnect the
mains plug from the mains
socket.
Turn off the MAIN POWER switch
according to the procedure given
in "Turning off the power" on
page 29 before disconnecting the
plug from the mains socket.
$ Gently turn the projector
upside down.
NOTE:
B Place the projector on top of a
soft cloth so that it will not
become scratched.
% Remove the air filter.
Put your fingernails under the air
filter and pull the air filter out of
the projector.
Air filter
62-E
NGLISH
All manuals and user guides at all-guides.com
& Clean the air filter.
Use a vacuum cleaner to clean
off any accumulated dust.
NOTE:
B Be careful not to let the air filter
get sucked into the vacuum
cleaner.
' Install the air filter.
NOTE:
B Be sure to install the air filter
cover before using the projector.
If the projector is used without the
air filter cover installed, dust and
other foreign particles will be
drawn into the projector, and
malfunctions will result.
B If the dust cannot be removed by
cleaning, it is time to replace the
air filter. Please consult your
dealer. Furthermore, if the lamp
unit is being replaced, replace the
air filter at this time also.
Replacing the
Warning
When replacing the lamp, al
to cool for at least one hour
before handling it.
B The lamp cover gets very h
and contact with it can caus
burns.
Notes on replacing t
lamp unit
B The light generating lamp is
made of glass, so dropping
allowing it to hit hard object
cause it to burst. Be careful
handling the lamp.
B After having removed the ol
lamp, carelessly discarding
cause the lamp to burst. Dis
of the lamp with the same c
that would be taken with a
fluorescent light.
B A Phillips screwdriver is
necessary for removing the
unit. Make sure that your ha
are not slippery when using
screwdriver.
NOTE:
B The projector is not supplied
a replacement lamp unit. Pl
ask your dealer for details. L
unit product no.: ET-LA780
CAUTION:
B Do not use any lamp unit ot
than the one with the produ
number indicated above.