- ページ 10

プロジェクター Panasonic PT-LB3EAのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic PT-LB3EA 19 ページ。 Pt-lb3 series
Panasonic PT-LB3EA にも： インフォメーション (6 ページ), 取扱説明書 (19 ページ)

ページを印刷する
Panasonic PT-LB3EA 取扱説明書
Using WebBrowser

Enabling JavaScript

„
If JavaScript has been set to disable, enable it.
1
Open <Internet Properties> window.
Click [Start] → [Control Panel] → [Network and Internet Connections] → [Internet Option].
2
Click the [Security] tab and set the security level to [Default Level], or select [Custom
Level] and check the [Enable] checkbox under [Active scripting].

Accessing from the WebBrowser

1
Start up the WebBrowser, and enter the IP address set to the projector.
The WebBrowser starts up and the authentication window appears.
http://10.69.104.56
<Top window>
2
Enter the User name and the Password.
3
Click [OK].
<Monitor information> window appears. (11 page)
•
The default user name and password settings are as follows:
User name: user1 (with user authority) / admin1 (administrator authority)
Password: panasonic (lower case)
•
Administrator authority has full access to the all features. User authority has access to "Status", "Projector control" and "Change
password". (User authority has no access to "Detailed set up".)
•
Password used in this page is for accessing the web control window.
•
The system locks for several minutes if an incorrect password is entered three times in succession.
•
If you initialize the network settings, the password is reset to "panasonic". Change the password to an appropriate one.
•
Make sure the password is as hard to guess as possible.
•
Change the password periodically.
•
If you have forgotten the password, perform [INITIALIZE] in the projector
in the "Change password" window of your WebBrowser. (See page 16)
•
Panasonic Corporation and its affiliated companies never directly ask customers for their password.
Do not give out your password even if directly asked by a third-party representing themselves as Panasonic Corporation.
•
The Top window may not appear depending on the WebBrowser. In this case start up WebBrowser again, or press the [Ctrl] + [R]
keys for example to update the screen.
•
Connection cannot be made while the WebBrowser is set to dial-up network. Cancel the dial-up network setting.
•
It may take some moments for WebBrowser to start up.
(cont.)
10
(See page 16)
's NETWORK menu (See page 8), and set a new one