- ページ 45
プロジェクター Panasonic PTL557U - LCD PROJECTORのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic PTL557U - LCD PROJECTOR 48 ページ。 Panasonic lcd projector operating instructions model no. pt-l557u
ページを印刷する
Lamp replacement procedure
Caution: Because of possibility of injury, strictly follow the replacement procedure below.
Order Lamp ET-LA057.
Tools required: A coin.
1
After the cooling fan has stopped, and STANDBY(R)
ON(G) indicator turns solid red. Set the Main Power
Switch to OFF and unplug the power cord.
Note: Please wait more than one hour for lamp replacement.
[ If you need to replace the lamp more urgently ]
The LCD Projector has a forced cooling feature. After the
POWER switch is turned OFF, and sometime during about the
first minute of the normal cooling fan operation, press < and > at
same time. The cooling fan will change to high speed for about 10
minutes. (The "C-d" STATUS CODE will be displayed.)
2
Grabbing the handle, place the LCD Projector up on
its side as illustrated.
3
Remove the Lamp cover screws.
First read caution and warning labels on Lamp cover. Then,
remove the Lamp cover screws (2) by using coin, and take off the
lamp cover.
4
Remove the Lamp unit screw.
Remove the lamp unit screw (2), then grasp the Lamp unit handle
and carefully pull it from the LCD Projector. Keep Lamp housing
opening to your right. Do not touch Lamp or point Lamp opening at
anyone.
WARNING: The lamp maybe hot Be careful when handling
CAUTION: • High-pressure lamp may be explode if improperly
handled
• Danger of injury due to lamp fragments
5
Install the new Lamp unit.
Remove the Lamp ET-LA057 from the LCD Projector and install a
new lamp unit (ET-LA057).
Do not drop, impact of dropping may cause Lamp to explode.
6
Replace the Lamp unit screws.
Replace the Lamp unit screw and the Lamp cover screws using a
coin to tighten.
Properly dispose of old Lamp.
7
Plug the LCD Projector back in by inserting Power
cord in LCD Projector AC socket and set the Main
Power Switch to ON.
8
Press POWER
9
Press MENU
10
Press
or
press < or >
to display the screen.
11
Press
or
press < or >
to display the screen.
12
Press
o r
press < or >
to display the screen.
13
Press < to >
select "YES". "Push POWER Button to reset" will
appear.
14
Press POWER
to turn LCD Projector ON.
to display the menu.
to select "SET UP PROJECTOR",
to select "SET UP FUNCTION",
to select "LAMP TIME RESET",
to reset the Lamp Time to "0".
Lamp cover
screw
Lamp unit
screw
and then
and then
and then
45
Main Power Switch
Coin
Coin
Lamp unit