- ページ 6

ポータブル・ステレオ・システム DiamondBoxx L3のPDF マニュアルをオンラインで閲覧またはダウンロードできます。DiamondBoxx L3 12 ページ。 Bluetooth boombox
DiamondBoxx L3 にも：オーナーズマニュアル (16 ページ)

TWS (True Wireless Stereo) Button

This controls the TWS (True Wireless Stereo) system on the

DiamondBoxx. This is used to con-nect two DiamondBoxx

2nd generation or later together wirelessly in a split stereo

pair for an amazing, headphone like stereo experience.

To USE TWS System

Start with both DiamondBoxxes powered OFF.

Power up one of the DiamondBoxx, pair your Bluetooth device

with it. Start streaming some music to it.

Power up the 2nd DiamondBoxx

Now go back to the 1st DiamondBoxx, press and hold the TWS

button until the Diamond starts flashing BLUE then release

button. This will set this Diamond-Boxx to "MAIN" speaker

which will receive and play LEFT audio only.

Now go to the 2nd DiamondBoxx, press and hold the TWS

button until the Diamond starts flashing GREEN then release

button. This will set this DiamondBoxx to "SECONDARY"

speaker which will receive and play RIGHT audio only.

Wait for up to 2 minutes for the DiamondBoxxes to configure

themselves and form a secure connection.

NOTE: The maximum distance between the MAIN and SECONDARY

DiamondBoxxes should be less than 50 feet with a unobstructed path of each

other. If obstructions like walls and human bodies exist between the two

DiamondBoxxes the max range could be shorter than 50 feet.

Tip: Raising the DiamondBoxxes off the ground/floor may help extend the

range.

If the TWS linking procedure didn't work, press and hold the TWS

button until the Diamond flashes RED, this will CLEAR the TWS

memory.

Do this to both units and start procedure again from Step 1.