- ページ 20
ステレオシステム Panasonic MW10 - 9.0" - Digital Photo frameのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic MW10 - 9.0" - Digital Photo frame 24 ページ。 Multimedia audio system
Panasonic MW10 - 9.0" - Digital Photo frame にも： 取扱説明書 (24 ページ)
ページを印刷するUsing with your PC
Photo fi les can be exchanged among this unit's internal
memory, SD and computer.
Do not use any other cables except a genuine Panasonic
USB connection cable (K2KZ4CB00015; optional).
System confi gurations required
OS for PC
•
Windows Vista
®
•
Windows
®
XP
•
Mac OS X
Port
•
USB port
•
Turn the unit off beforehand.
•
Start up the computer beforehand.
1. Confi rm the direction of the USB connection cable
(optional) and insert it to the USB port of this unit.
2. Insert the USB connection cable to the computer.
3. Turn this unit on.
4. Press [e, r] to select the USB connection memory
("Internal Memory" or "SD Card") and press [OK].
This unit functions as a reader/writer and is
recognised as an external device of computer.
To remove the USB connection cable
Double-click the icon (Windows XP:
on the task tray of computer and remove it according to the
on-screen instruction. (The above may not be displayed
depending on the OS setting. In this case, make sure to
confi rm that the message indicating communication is in
process is not displayed on this unit's display, and then
remove the cable.)
•
For Macintosh, follow the removal method for Mac OS
device.
To switch the USB connection memory
Remove the USB connection cable once, then reconnect it
and perform the above steps 3 and 4.
To exchange photo fi les with a computer
1. Open the folder to exchange photo fi les on the computer.
2. Perform the above steps 1 to 4.
3. Open this unit's drive icon in "My Computer" or
"Computer" of your PC.
•
For Macintosh, this unit's drive is displayed on the
desktop.
4. Open the photo folder on this unit.
5. Exchange fi les between the folders.
•
Folders and fi les can be dragged and dropped.
Note
•
If you remove and insert the USB connection cable or SD
card while "Accessing. Do not remove the card or cable."
message is displayed, the data on the SD card may be lost
or damaged.
•
You cannot operate this unit while connecting with the
computer.
20
•
•
•
•
•
•
Installation of this unit
When installing the unit on the table, etc., make sure the
display part does not protrude from the table when it is
opened. The unit may fall down and drop.
To fi x the unit
When installing the unit on the table with narrow depth, use
the included fall-prevention belt to fi x the unit to the wall or
, Windows Vista:
)
pillar. (The following illustration is a setting example.)
A Wall, pillar, etc.
B Fall-prevention belt (included)
C Wood screw (included) (Black), etc.
D Bottom face of this unit
E Screw for fall-prevention belt (included) (Silver)
Note
•
•
•
If the USB connection cable is removed, this unit is turned
off.
Data exchange with iPod is not possible.
If you make multiple USB connections or use hubs with 1
computer, malfunction may occur.
If you are using the 10.2 or older version of Mac OS X,
set the write-protect switch of SDHC memory card to the
"LOCK" side when importing photos from the SDHC card
to the computer.
When this unit is connected, do not use the format function
of the computer to format this unit's internal memory or SD
card.
Operations are not necessarily guaranteed for all
computers.
D
Be sure to use the screw for fall-prevention belt to attach to
the bottom face of this unit.
If you tighten the screw for fall-prevention belt too tightly, it
goes around in circle and cannot be fi xed.
Keep the screws out of reach of children to prevent
swallowing.
A
B
C
E