- ページ 14

ステレオシステム Panasonic NS55 - SC Micro SystemのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic NS55 - SC Micro System 24 ページ。 Cd stereo system

ページを印刷する

Sound adjustment

Selecting sound effects

You can change the sound effect by selecting Preset EQ or

adjusting the bass or treble effect.

Preset EQ

Press [PRESET EQ] repeatedly to select your desired

setting.

HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF

Setting

Effect

HEAVY

Adds punch to rock

CLEAR

Clariﬁ es higher frequencies

SOFT

For background music

VOCAL

Adds gloss to vocal

EQ-OFF

No effect

Bass or treble

Enable you to enjoy the lower or higher pitch sound.

Press [BASS/TREBLE] repeatedly to select your

desired setting.

Setting

Effect

BASS

For lower pitch sound

TREBLE

For higher pitch sound

Press [5] or [∞] to adjust the level.

Note

The tone level can be varied within -4 to +4.

Enjoying surround sound

Enable you to add natural width and depth to the stereo

sound.

To activate

Press [SURROUND] to display "

To cancel

Press [SURROUND] again to clear "

Note

• Surround sound is less discernible when listening through

headphones.

• If interference in FM stereo reception increases, cancel the

surround sound effect.

Numeric

buttons

BASS

TREBLE

original display

" indicator.

External unit

Connecting to a portable audio equipment

This feature enables you to enjoy music from portable audio

equipment.

Portable audio equipment

(not included)

Playing from portable audio equipment

Switch off the equalizer function (if there is any) of the

portable audio equipment before you plug into the MUSIC

PORT jack. Otherwise, sound from the speaker may be

distorted.

Plug the audio cord into the MUSIC PORT jack and

press [MUSIC PORT].

Play the portable audio equipment. (See the

portable audio equipment's instruction manual.)

Note

All peripheral components and cables are sold separately.

Changing the remote control code

Change the code if you ﬁ nd the remote control unintentionally

also controls other equipments.

Change the main unit's code

Press and hold [MUSIC PORT] on the main unit and then

press and hold [2] (or [1]) on the remote control.

"REMOTE 2" is displayed.

Change the remote control's code

Press and hold [ENTER] and [2] (or [1]) on the remote

control for at least 2 second.

If the remote control and main unit are using different codes,

a message appears on the main unit's display showing the

main unit's current code. Follow the above step to change

the remote control's code to match it.

Audio cord (not included)