- ページ 13

ステレオシステム Panasonic PM31 - SC Micro SystemのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic PM31 - SC Micro System 16 ページ。 Cd stereo system

ページを印刷する

• Play timer and record timer cannot be used together.

• The play timer will start at the preset time with volume increasing

gradually to preset level.

• The record timer will start 30 seconds before the set time with the

volume muted.

• The timer comes on at the set time everyday if the timer is on.

• The unit must be in the standby mode for the timer to function.

• If you turn the unit off and on again while a timer is functioning, the

ﬁ nish time setting will not be activated.

• If AUX is selected as the source, when the timer comes on, the

system turns on and engages AUX as the source. If you want to

playback or record from a connected unit, set the other unit's timer

to the same time. (See the other unit's instruction manual.)

External unit

Connecting external unit

Preparation

• Make sure that the power supply for all components has

been turned off before making any connections.

• For details, refer to the operating instructions of the unit

which is to be connected.

• All peripheral components and cables sold separately.

Connecting analogue equipment

This example shows how to connect an analogue player with

a PHONO OUT/LINE OUT switch.

When units other than those described are to be connected,

please consult your dealer.

"LINE OUT"

position

Analogue player (not included)

• An analogue player with a built-in phono equalizer can be

connected.

• Set the switch to the "LINE OUT" position at the back of the

analogue player.

Playing or recording from an external

unit

Press [AUX].

For listening: Proceed to step 3.

For recording: Press [¶/8 REC] to start recording.

Start playback from the external source. (For details,

refer to the external unit's instruction manual.)

(L)

(R)

AUX

Rear panel of this unit

Sound adjustment

Selecting sound effects

You can change the sound effect by selecting Super Sound

EQ, Preset EQ or adjusting the bass or treble effect.

Super sound EQ

Provide you with clearer bass and treble effects.

To activate

Press [S.SOUND EQ] to display "S.SOUND EQ" indicator.

To cancel

Press [S.SOUND EQ] again to clear "S.SOUND EQ"

indicator.

Preset EQ

Press [PRESET EQ] repeatedly to select your desired

setting.

HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF

Setting

Effect

HEAVY

Adds punch to rock

CLEAR

Clariﬁ es higher frequencies

SOFT

For background music

VOCAL

Adds gloss to vocal

EQ-OFF

No effect

Bass or treble

Enable you to enjoy the lower or higher pitch sound.

Press [BASS/TREBLE] repeatedly to select your

desired setting.

Setting

Effect

BASS

For lower pitch sound

TREBLE

For higher pitch sound

Press [∞] or [5] to adjust the level.

The tone level can be varied within -3 to +3.

Enjoying surround sound

Enable you to add natural width and depth to the stereo

sound.

To activate

Press [SURROUND] to display "

To cancel

Press [SURROUND] again to clear "

• Surround sound is less discernible when listening through

headphones.

• If interference in FM stereo reception increases, cancel the

surround sound effect.

" indicator.

RQT7928