- ページ 3

ステレオシステム Panasonic RX-C52のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic RX-C52 21 ページ。 Portable stereo component system

PRECAUTIONS
eAvoid using or placing this unit near sources of heat. Do
not leave it in an automobile exposed to direct sunlight for
a long time with the doors and windows closed as this may
deform the cabinet.
Cassettes, both recorded and unrecorded, should not be
stored in locations with high temperature, high humidity or
direct sunlight. Never place a recorded cassette near a
magnetic source, such as a magnet or a TV set as this
may affect tape performance.
eAvoid using C-120 cassette tapes with this unit because
they can easily broken, stretched or twisted if not used with
extreme care.
eTape
looseness
can
be
cor-
rected
by
inserting
a _ pencil
through one of the cassette reels
and turning
it to take
up the
slack.
eWhen not in use, disconnect the
power cord from the AC power
outiet.
Pencil
Max. 104°F (40°C)
RECORD
PREVENTION TABS (KNOCK-OUT TABS)
Cassettes are provided with plastic tabs (as illustrated) to
prevent accidental erasing of a recording.
Recordings can be made only when the tab is intact.
There is one tab for each side of the tape. To preserve a
valuable recording, the tab(s) should be broken off with a
small screwdriver.
if you want to record on a track whose tab has already been
broken off, use cellophane tape to cover the hole, and
record.
SS
3
}
<ue
*For side 2
NO
YES
@-a-
img
Cellophane tape
About the record prevention tabs and recording standby
*lf both record prevention tabs are broken out...
The unit will not enter the recording standby mode
even if the Record Button is pressed. If you continue
pressing the Record Button, the Forward Indicator
and Reverse Indicator will flash. Recording will not be
possible on either side of the tape.
elf only one of the record prevention tabs is broken
out...
lf you attempt to record on the tape side without the
record
prevention
tab, even
though the unit will
enter the recording standby mode when the Record
Button is pressed, recording on that side of the tape
will not be possible.