- ページ 13

ステレオシステム Panasonic RX-DT670のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic RX-DT670 25 ページ。 Portable stereo component system
Panasonic RX-DT670 にも：取扱説明書 (24 ページ)

ページを印刷する

PLAYING A OtSC

■ Program play

up to 16 tracks can be programmed.

^ Press the skip/search button

specify the desired track number.

Press the skip/search button repeatedly until the desired

track appears.

2. Press the memory/recall button.

The play sequence is first indicated and after about

2 seconds, the time of the whole play sequence is

displayed.

Total playing time for specified tracks

3. Repeat the steps 1 -2 to be played in sequence.

o-no

IPflUl

ji'U u

"—;—" appears on the time display when the total play

time of the programmed tracks exceeds 120 min 0 sec,

or track no. 21 and above have been programmed.

'TULL" appears and flashes on the display when the

program memory is already full. This is to indicate that no

more additional track can be programmed.

4. Press the play/pause button.

Play starts in the programmed sequence.

□

nn 1

U'U

IPSUI

•To Stop the program play

Press the stop/clear button.

Play will stop automatically when all the programmed tracks

have been played.

(Play will stop and the programmed memory will be

retained.)

•To confirm the programmed track

The tracks which have been programmed and the play

sequence can be checked for about 1 second when the

memory/recall button is pressed in the stop mode.

■ Clearing a program

•Clearing all the programmed tracks

(Cancelling the programmed play mode)

1. Press the memory/recall button in the stop mode.

The program indicator will start to flash on the display for

several seconds.

2. Press the stop/clear button while the program indicator is

flashing.

The program indicator goes out and the programming is

cleared.

•Clearing only the track programmed last

Press the stop/clear button in the stop mode.

Each time the button is pressed, the track programmed last

can be cleared in sequence.

Example: When tracks 3,5 and 7 have been programmed,

the tracks will be cleared in the sequence of 7,5 and 3 each

time the stop/clear button is pressed.

The programmed mode will be cancelled if you open the

disc tray.

Note:

It is not possible to clear only a track located in the

middle of the program (such as the third of 5 tracks).