- ページ 2

ステレオシステム Panasonic SA-AK230のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Panasonic SA-AK230 5 ページ。 Cd stereo system model no. sc-ak330; sc-ak230
Panasonic SA-AK230 にも：取扱説明書 (16 ページ), 取扱説明書 (16 ページ)

ページを印刷する

Unauthorized copying and distribution is a violation of law.

1. Connection of the Speaker Cables

- Be sure to connect speaker cables before connecting the AC

power supply cord.

- The load impedance of any speaker used with this unit must be 5

- Be sure to connect the cable from the right speaker to the right

terminal and the cable from the left speaker to the left terminal.

1. Strip off the outer covering, and twist the center conductor. Make

sure the bare ends of the wires are not unravelled. (If they are,

twist them tight again.)

2. Insert the wire to the rear panel of the unit and close the lever.

Notes :

- To prevent damage to circuitry, never short-circuit positive (+) and

negative (-) speaker wires.

- Be sure to connect only positive (red) wires to positive (+)

terminals and negative (black) wires to negative (-) terminals.

Placement

Speakers are designed identically so that no left or right channel orientation is necessary.

Notes :

- Keep your speakers at least 10 mm away from the system for

PDF created with pdfFactory Pro trial version