- ページ 8
ステレオシステム Panasonic SA-AK521のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic SA-AK521 40 ページ。 Cd stereo system model no. sc-ak521
ページを印刷する
CDs
g
/REW/3,
f
/FF/4
DISC 1-5
PROGRAM
PLAY MODE
REPEAT
DEL
ALBUM (
or
)
Basic play
1
Press [c, OPEN/CLOSE] to open the tray.
The unit comes on.
2
Set a CD in the tray.
To continue loading CDs in the other trays
Press [1]–[5] to select the required tray and press [c, OPEN/
CLOSE] to open the tray.
Press [c, OPEN/CLOSE] to close the tray.
3
Press [1]–[5] to play your desired disc.
1
5
4
3
(Alternatively, you can press [:/J, CD] if the current disc is your
desired CD.)
The track number and its elapsed playing time are shown.
Use the CD Play Mode function's ALL-DISC mode to play CDs in
succession. (A see right)
To stop the disc play
Press [L, STOP].
The total number of tracks and total playing time are shown.
One touch play
During standby mode and when a CD is loaded, press [:/J, CD] or
[1] – [5].
The unit comes on and play starts.
To pause
To search forward/
backward
To skip forward/
8
backward
RQT7418
c, OPEN/CLOSE
CD direct
play 1~5
L, STOP
-/J, CD
CD DISP
Numbered
buttons
-/J, CD
L, CLEAR
g
, REW/3,
f
, 4/FF
(Label must face upward.)
Current disc indicator
2
Press [:/J, CD] during play.
Press again to resume play.
Hold down [g/REW/3] (backward)
or [f/FF/4] (forward) during play or pause.
Press [g/REW/3] (backward) or
[f/FF/4] (forward) during play or pause.
Note
•
During 1-RANDOM or A-RANDOM play (A see below), you cannot
skip to tracks already played.
•
During program play (A page 9), 1-RANDOM or A-RANDOM play,
you can search only within the track.
•
You cannot use search function for MP3 files.
•
Always stop the changer before loading or changing CDs. You
cannot change CDs while a disc is playing.
CD display
You can display the remaining play time of the current track.
Press [CD DISP] on the remote control during play or pause.
Every time you press the button:
Elapsed play time
Remaining play time
Note
When track number 25 or greater is playing, remaining play time
display shows "– –:– –".
Repeat play
Remote control only
Press [REPEAT] during play.
"
" is displayed.
To cancel repeat play
Press [REPEAT] to clear "
" .
To listen to specific CDs and tracks
(CD Play Mode function)
Remote control only
Preparation: Press [:/J, CD] and then [L, CLEAR].
1
Press [PLAY MODE] to select the desired mode.
Every time you press the button:
ALL-DISC
1-SONG
1-RANDOM
1-DISC
ALL-DISC:
Plays all loaded discs in succession from the
selected disc to the final disc .
1-SONG:
Plays one selected track on the selected disc.
1-RANDOM: Plays one selected disc in random order.
A-RANDOM: Plays all loaded discs in random order.
1-DISC:
Plays one selected disc.
(The original display is restored in about 2 seconds.)
Proceed to step 4 when you selected A-RANDOM in step 1.
2
Press [DISC] and
(within 10 seconds)
disc.
The CD starts.
3
Only when you selected "1-SONG" in step 1
Select the track with the numbered buttons.
To select a track 10 or over, press [X10] then the two digits.
Play starts from the selected track.
4
Only when you selected "A-RANDOM" in step 1
Press [:/J, CD] to start play.
To stop play
Press [L, CLEAR].
When playback ends
The current play mode will be retained in memory until it is changed
even if the unit is turned off.
Final disc
For example, if play starts from disc 4, disc 3 will be the "final disc".
Order of progression: Disc 4z5z1z2z3
Note
•
You can use repeat mode with CD Play Mode function.
•
You cannot use program mode together with CD Play Mode function.
A-RANDOM
[1]–[5] to select the