- ページ 9

ステレオシステム Panasonic SA-PM42のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic SA-PM42 48 ページ。 Cd stereo system
Panasonic SA-PM42 にも: 取扱説明書 (20 ページ)

Panasonic SA-PM42 取扱説明書

Using the FM/AM radio

Manual tuning
1
Press [FM/AM] to select "FM" or "AM".
2
Press [TUNE MODE] to select "MANUAL".
3
Press [u/t] or [y/i] to select the frequency of the
required station.
"ST" is displayed when a stereo FM broadcast is being received.
To tune automatically
Press [u/t] or [y/i] for a moment until the frequency starts
changing rapidly. The unit begins auto tuning, stopping when it finds a
station.
Auto tuning may not function when there is excessive interference.
To cancel auto tuning, press [u/t] or [y/i] once again.
To improve FM sound quality
Press [FM MODE] to display "MONO".
To cancel
Press [FM MODE] again until "MONO" disappears.
MONO is also cancelled if the frequency is changed.
Turn off "MONO" for normal listening.
FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in 0.1 MHz steps.
To change the step to 0.1 MHz
1
Press and hold [FM/AM].
After a few seconds the display changes to a flashing display of the
current minimum frequency.
2
Continue to hold down [FM/AM].
When the minimum frequency changes, release the button.
To return to the original step, repeat the above steps.
After the setting is changed, any previously preset frequency will
be cleared.
SC-PM42PP,PC.indb 9
TUNE
Memory preset
MODE
FM/AM
Up to 30 stations can be set in the FM band and 15 stations in the
AM band.
Preparation
Press [FM/AM] to select "FM" or "AM".
Automatic presetting
1
Press [PLAY MODE] to switch between "LOWEST" or
"CURRENT" frequency.
2
Press [AUTO PRESET] to start presetting.
Manual presetting
1
Press [TUNE MODE] to select "MANUAL".
2
Press [u/t] or [y/i] to tune to the required station.
3
Press [PROGRAM].
4
Press numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset in that channel.
5
Repeat steps 2 to 4 to preset more stations.
FM
MODE
Selecting a preset station
Press numeric buttons to select the channel.
OR
1
Press [TUNE MODE] to select "PRESET".
2
Press [u/t] or [y/i] to select the channel.
FM/AM
FM/AM
AUTO
PRESET
TUNE
MODE
TUNE
MODE
9
9 9
2/5/2010 10:55:31 PM