- ページ 5

ボイスレコーダー Diasonic DDR-4500のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Diasonic DDR-4500 18 ページ。

b. Hard Reset – This function is useful to solve malfunctions that the "Soft Reset" is unable

to repair. Except for time and date, all previous settings will be reset to factory defaults. All

files on the internal memory will be erased.

i. With the LOCK switch in the "up" position, press and hold the BACK button.

ii. While continuing to hold in the BACK button, press and release the RESET button.

iii. Continue to hold the BACK button until "FormatPlease Wait ... " is displayed, then

release. Formatting takes about one minute to complete.

iv. When formatting is finished, position the LOCK switch to the "down" position before

using.

(13) VOLUME + – BUTTON

The VOLUME + – Button has 30 levels of loudness.

Press and release or press and hold "+" to increase or "–" to decrease the volume.

(14) LOCK SWITCH

The LOCK SWITCH has two positions: If moved to the "up" position, then the CC Witness will be

locked and all buttons will be disabled. This feature is used to prevent buttons from being

accidentally pressed during travel or storage. If a button is pressed while locked, the time and

date will be displayed, along with the "Lock Switch ON"message.

(15) MIC

The internal microphone is used to make voice recordings.

(16) MIC/LINE IN JACK

This jack is used to record from an external source such as a CD player, radio, or external

microphone. Choose between using a MIC or LINE IN source.

(17) SD CARD SLOT

Add up to 16GB of memory storage by inserting an optional SD card.

(18) HEADPHONE JACK

The Headphone Jack has 2 purposes:

a. To connect headphones or earphones.

b. To connect the FM Antenna Wire, for improved FM

reception, when using the built-in speakers.

(19)LOCK SWITCH

To turn the CC Witness LOCK Switch "On", slide the LOCK Switche"up".

Before using the CC Witness, check the LOCK switch to be sure it is off. While the LOCK switch is