- ページ 19
ステレオシステム Panasonic SCAK20 - MINI HES W/CD-PのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Panasonic SCAK20 - MINI HES W/CD-P 36 ページ。 Panasonic sc-ak20 cd stereo system operating instructions
Panasonic SCAK20 - MINI HES W/CD-P にも： 取扱説明書 (37 ページ), 取扱説明書 (36 ページ)
ページを印刷するBefore recording (Deck 2 only)
To fosf"forwQrd or rewind the tape
Type of tape which con be recorded correctfy
Press
or
in the stop mode.
The unit automatically identifies the type of tape.
Tape direction
To rewind
To fast-forward
To find the beginning of o program
(TPS: Tope Program Sensor)
Press
or
during play.
Tape
direction
To play the current tune
from the beginning
To play the next tune
from the beginning
The TPS function searches for silent parts of about 4 seconds in length
which are normally found between tunes. As a result, it may not
function properly in the following cases
• With short silent parts
• When noise occurs between tunes
• With silent parts found within tunes
NORMAL POSITION/TYPE I
O
HIGH POSITION/TYPE II
O
METAL POSITION/TYPE IV
X
This system cannot make a recording or erasing correctly, if metal
position tapes are used.
To record from the beginning of the tape
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
Recording part
Leader tape
(no recording can be made)-
How volume, sound quality/field and V. BASS
effect recording
The tape you are recording is not effected whatsoever by changes in
volume, sound quality/field or V. BASS.
• In recording, sound quality/field are set automatically to "FLAT".
• You can change volume and V. BASS effect for the playback sound.
To erase a recorded sound
1. Press TAPE DECK 1/2.
2. Insert the recorded tape into deck 2.
3. Press REV MODE to select reverse mode.
4. Press •REC/STOP.
• You cannot open the deck 1 while recording.
• You cannot fast-forward or rewind one deck while recording with
the other.
19