- ページ 2
防犯カメラ Axis 205のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Axis 205 6 ページ。 Axis communications network camera
Axis 205 にも： インストレーション・マニュアル (10 ページ), (イタリア語）仕様 (2 ページ)
ページを印刷する
AXIS 205 Quick Installation Guide
Hardware Installation
Mounting on a Horizontal Surface
1. Attach the camera to the stand
2. Adjust the angle of the camera
3. Gently tighten the lock ring
Mounting on a Vertical Surface
1. Remove the stand extension.
2. Angle and fasten the camera as described above.
Important!
The AXIS 205 is designed for indoor use only, and must always be positioned where it is not exposed to
direct sunlight or strong halogen light. Exposure to direct sunlight or halogen light may cause perma-
nent damage to the image sensor in the AXIS 205.
Damage as a result of exposure to strong light is not covered by the Axis warranty.
Connecting the Network and Power Cables
1. Connect the AXIS 205 to your network using a standard
RJ-45 network cable.
2. Connect the power to the camera.
3. The AXIS 205 is designed for installation on an Ethernet
network. This involves assigning an IP address to the
network camera, either automatically (e.g. DHCP) or
manually.
4. See One-click Installation, on page 3
- alternatively -
Manual Installation using AXIS IP Utility, on page 4
Please consult your network administrator or refer to the user documentation of
your network to check if you should select automatic or manual IP address
assignment.
For additional information on this and other issues, please refer to the Axis Web site
at www.axis.com
Page 2 of 6
Lock Ring
Stand
extension