ページを印刷する
Troubleshooting
Errors and solutions
●
Error
Cause
Switch button is turned
When in charging, press
off
the START button and
the vacuum won't back
off and starts cleaning.
The vacuum is connected
And the light turns red
to the adaptor directly
with 3 beeps
for charging
Inappropriate installment
of dust bin
The inside fan doesn't
Magnet of dust bin gets
work when installing the
lost
dust bin
Fan failure
The vacuum keeps acting
like: back- swing from
Foreign body in roller
left to right- back- turn
brush tank
around
Front sensors get
covered by dust
The vacuum keeps acting
like: back- turn in circles
or keep turning in circles
Cliff sensors get covered
by dust
The vacuum acts like:
back -turn around for 3
Front bumper gets stuck
times when cleaning
The vacuum acts like:
back -turn around every
2-3 seconds when
Nose wheel failure
cleaning and without any
other trouble
15
Solution
Turn on the switch
button and press the
START button again
Cut off the power and
turn on the switch
button
Re-install the dust bin
Contact the seller
Contact the seller
Clean the roller brush
tank
Clean the sensors
Gently pull and pat the
front bumper
Move the nose wheel by
hand and check if it gets
stuck
Troubleshooting
Product specifications
●
Item
Diameter
Height
Net weight
Voltage
Battery
Dust bin capacity
Charging type
Cleaning modes
Charging hour
Working hour
Specifications
305mm
75mm
3kg
14.8V
Li-ion 2600mAh
350ml
Auto
Auto, spot, edge, scheduling
5 hours
150 minutes
16