ページを印刷する
Troubleshooting
Battery removal
A. Remove the screws on battery cover with a driver.
B. Pull out the battery cover.
C. Grasp the isolated strips at two sides of the battery and pick the battery up.
D. Separate the wire connector that links battery and robot.
E. Put a new battery into battery slot with the character side facing up.
F. Joint the wire connector between battery and robot.
G. Check whether wire connector and isolated strips have been placed well.
H. Put the battery cover onto battery slot with right direction.
I. Lock the screws on battery cover with a driver.
Note: Use factory-authorized battery only.
36
Product Specifications
Classification
Item
Diameter
Mechanical
Height
Specifications
Weight
Power voltage
Electrical
Specifications
Battery specifications
Dust bin capacity
Charging type
Cleaning
Cleaning mode
Specifications
Charging time
Cleaning time
Main Body Button Type
Note: Product storage temperature: -20°to 50°(centigrade).
Detail
340mm
90mm
3.0kg
14.4 V
Ni-MH 2000mA
0.3L
Auto Charging/Manual Charging
Auto, Spot, Edge, Daily Schedule
About 200min
About 90min
Touch(LED display)
37