- ページ 2
防犯カメラ Axis Axis 210AのPDF 仕様をオンラインで閲覧またはダウンロードできます。Axis Axis 210A 2 ページ。 Network camera
Axis Axis 210A にも： 仕様 (6 ページ), 仕様 (2 ページ)
ページを印刷する
AXIS 210A/211A Network Cameras
Models
AXIS 210A: indoor use only
AXIS 211A: varifocal DC-Iris, indoor/outdoor
Image Sensor
1/4" Sony Wfine progressive scan RGB CCD
Lens
AXIS 210A: 4.0 mm, F1.2, fixed iris, CS mount
AXIS 211A: 3.0 - 8.0 mm, F1.0, DC-iris, CS mount
Angle of view
AXIS 210A: 48° horizontal
AXIS 211A: 27º-67º horizontal
Minimum illumination AXIS 210A: 1.0 lux, F1.2
AXIS 211A: 0,75 lux, F1.0
Video compression
Motion JPEG
MPEG-4 Part 2 (ISO/IEC 14496-2), Profiles: ASP and SP
Resolutions
16 resolutions from 640 x 480 to 160 x 120 via API,
5 selections via configuration web page
Frame rate
Motion JPEG:
Up to 30 fps in all resolutions
MPEG-4:
Up to 25 fps at 640x480
Up to 30 fps at 480x360 or lower
Video streaming
Simultaneous Motion JPEG and MPEG-4
Controllable frame rate and bandwidth
Constant and variable bit rate (MPEG-4)
Image settings
Compression levels: 11 (Motion JPEG)/23 (MPEG-4)
Rotation: 90º, 180º, 270º
Configurable color level, brightness, contrast, exposure,
white balance, fine tuning of behavior at low light
Overlay capabilities: time, date, privacy mask, text or image
Audio
Two-way (full or half duplex) or one-way.
Built-in microphone and external microphone input. Mono
audio output (line level) connects to PA system or active
speaker with built-in amplifier.
Audio compression: G.711 PCM 64kbit/s, G.726 ADPCM 32
or 24 kbit/s
Shutter time
2 sec to 1/12500 sec
Security
Multiple user access levels with password protection
IP address filtering, HTTPS encryption
Users
20 simultaneous users of which 10 with audio
Unlimited users using multicast (MPEG-4)
Language support
English. Downloadable language files for French, German,
(Web interface)
Italian, Japanese and Spanish are available at www.axis.
com/techsup. Other language files may also be available.
Alarm and event
Events triggered by built-in motion detection, audio
management
detection, external inputs or according to a schedule.
Image upload over FTP, email and HTTP
Notification over TCP, email, HTTP and external outputs
Pre- and post alarm buffer: up to 9 MB (up to 5 min of
320x240 video at 4 frames per sec)
Connectors
RJ-45 for Ethernet 10BaseT/100BaseTX
Terminal block for 1 alarm input, 1 output and alternative
power connection
3.5 mm jack for Mic or Line mono input
3.5 mm jack for Line mono output
Interlaced, 20 ms difference
between odd and even lines
Progressive scan is used instead of the interlaced method found in analog CCTV
(PAL/NTSC) cameras. With progressive scan all pixels (lines) are captured at the
same time, enabling moving images to be presented without distortion.
Specifications
Progressive Scan, all lines are
captured at the same time
www.axis.com
Processors, memory
CPU: ETRAX 100LX 32bit
and clock
Video processing and compression: ARTPEC-2
RAM: 32 MB, Flash: 8 MB
Battery backed up real-time clock
Power
7-20 V DC max 7 W, PoE IEEE802.3af Class 2
Operating conditions
5 - 45 ºC (41 – 113 ºF), humidity 20 - 80% RH
Installation,
AXIS Camera Management tool on CD and web-based
management and
configuration
maintenance
Configuration of backup and restore
Firmware upgrades over HTTP or FTP, firmware available at
www.axis.com
Video access from
Camera live view, video recording to file (ASF), sequence
Web browser
tour for up to 20 external Axis video sources, customizable
HTML pages
Minimum
Pentium III CPU 500 MHz or higher, or equivalent AMD,
Web browsing
128 MB RAM, AGP graphics card 32 MB RAM, Direct Draw
requirements
Windows XP, 2000, 2003 Server, DirectX 9.0 or later
Internet Explorer 6.x or later
For other operating systems and browsers see www.axis.
com/techsup
System integration
Open API for application integration
support
including AXIS VAPIX API*, AXIS Media Control SDK*, event
trigger data in video stream
Quality of Service (QoS) Layer 3, DiffServ Model
Embedded Linux operating system
* Available at www.axis.com
Supported protocols
IPv4/v6, HTTP, HTTPS, SNMPv1/v2c/v3 (MIB-II), SSL/TLS*,
TCP, QoS, RTSP, RTP, UDP, IGMP, RTCP, SMTP, FTP,
ICMP DHCP, UPnP, Bonjour, ARP, DNS, DynDNS, SOCKS,
IEEE802.1X.
More information on protocol usage available at www.
axis.com
*This product includes software developed by the Open SSL Project for
use in the Open SSL Tool kit (www.openssl.org)
Video management
AXIS Camera Station - Surveillance application for viewing,
software (not incl.)
recording and archiving up to 25 cameras
See www.axis.com/partner/adp_partners.htm for more
software applications via partner
Included Accessories
Power supply 9 V DC, stand, connector kit, Installation
Guide, CD with installation tool, software and User's
Manual, MPEG-4 licenses (1 encoder, 1 decoder), MPEG-4
decoder (Windows)
Accessories (not incl.) Housings for adverse indoor/outdoor environments
Power over Ethernet midspans
AXIS 292 Network Video Decoder
MPEG-4 Decoder multi-user license pack
Approvals
EN 55022 Class B, EN 61000-3-2, EN 61000-3-3,
EN 55024, FCC Part 15 Subpart B Class B,
ICES-003 Class B, VCCI Class B, C-tick AS/NZS 3548,
EN 60950
Power supply: EN 60950, UL, cUL
Dimensions (HxWxD)
AXIS 210A: 38 x 88 x 157 mm (1.5" x 3.4" x 6.2")
and weight
AXIS 211A: 38 x 95 x 178 mm (1.5" x 3,7" x 7.0")
270 g (0.6 lb)
Power over Ethernet
enabled switch
AXIS 211A
Intercom
Cabling requirements and installation costs are reduced by the built-in support for
Power over Ethernet and audio, enabling power to the cameras and two-way audio
to be delivered over the network.
Internet/
Network