- ページ 14

浄水器 Bion-Tech BTM-3000のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Bion-Tech BTM-3000 20 ページ。 Super oxide water ionizer batch system

Show to make super oxide water

3. Adding salt

●

put each one measure spoon

of salt into the both water tanks of

the Electrolytic cell and melt

it completely.

The table salt 99% is available.

4. Putting Top cover

●

fix the Top cover at the main body

in order for the Connecting Plug to be

matched correctly with the socket.

5. Power supply

●

Plug-in the electric power cord into

the outlet.

And turn on the Power button.

Indicator Lamp will be red-lighted.

6. Selection of ionization time

●

Set the time at 30 minutes.

※ Set the Ion Button light in green.

7. Completion of Ionization

●

When the timer switch arrives at OFF, it sounds for 20 seconds.

※ Before using the product, the micro-porous paper of Ion Exchange

Membranes has been dried. In the first operation, Ions in water may

not flow smoothly through the Membranes because of this.

If you want to test product performance, please use Ionized Water

created from the secondary use.

※ We recommend that you use after stirring a few times Ionized Water

in Water Tank of the Electrolytic Cell with a measurement spoon

due to the concentration of Ions may be unequally.

BTM-3000 (영).indd 14

How to make alkaline water for drinking

3. Nothing added

6. Selection of ionization time

●

Set the time at 20 minutes.

※ Set the Ion Button light in green.

MEMO

2016-08-25 오후 5:11:51