携帯電話 HTC 2Q5V200のPDF 挿入マニュアルをオンラインで閲覧またはダウンロードできます。HTC 2Q5V200 2 ページ。 Inserting nano sim and microsd cards

ページを印刷する

HTC Desire 12

___

Inserting nano SIM and microSD cards

IMPORTANT:

Use a standard nano SIM only.

Don't cut a micro or regular SIM card and insert it into

the nano SIM slot. It's thicker than the standard nano SIM

card and may get stuck in the slot.

Don't disassemble any part of the phone.

Don't try to open the phone or remove the battery by force.

This may damage the phone or its electronics and will

invalidate the warranty.

Don't throw the tray away.

You need it to insert your nano SIM and microSD™ cards.

gold contacts

nano SIM

cut-o corner

1. With the phone facing up,

insert the tip of the tray

eject tool that came in

the box (or a small bent

paperclip) into the tray

eject hole.

Push the tip all the way

into the hole until the

card tray ejects and then

gently pull the tray out.

2. With the gold contacts

facing down, place your

nano SIM and microSD

cards into the SIM and

SD holders of the tray.

Make sure to align the

cut-off corner of the

nano SIM card to the

notch on the holder.

microSD

gold contacts

___

Restarting the phone

To restart your phone when it doesn't respond to touch

screen or button presses, press and hold the POWER

and VOLUME DOWN buttons (for 12 to 15 seconds)

until the phone vibrates, and then release the buttons.

___

Need help?

Go to www.htc.com/support/ to ﬁ nd the user guide,

how-to articles, and more. Please also read the Safety

and regulatory guide that's included in the box.

HTC and the HTC logo are

trademarks of HTC Corporation.

microSD is a trademark of SD-3C

LLC.

All other company, product

and service names mentioned

herein are trademarks, registered

trademarks or service marks of

their respective owners.

htc.com

3. When reinserting the

tray, make sure it is

facing up so that the

cards don't fall out.

Hold the tray with the

microSD card between

your fingers, and then

steadily slide the tray

all the way into the slot.

91H0xxxx-xxM Rev.A