ページを印刷するWARNING!
Danger of electric shock!
c Do not ever pull or lift the apparatus through the electrical
cable.
c Do not immerge the apparatus into water and neither use
water jets to clean it.
c Always remove the plug from the current socket before
undertaking any type of intervention on the apparatus
or if it is left unattended or within children or people's
reach not quite conscious of their own actions.
c Regularly control the feeding cable looking for damages,
cracks or ageing. Substitute the cable before using it
further.
c If the feeding cable is damaged it must be substituted by
the manufacturer or by its after sales service or in any
case by a similarly qualifi ed person, thus preventing any
possible risk.
c When using extension electric wires ensure that they are
lying on dry surfaces and protected against possible
water jets.
WARNING!
Risk of injury!
m Specialized personnel must always carry out
maintenance and repairs; any damaged part must be
substituted with original spare parts.
m It is forbidden to carry out changes to the apparatus.
Tampering could cause fires and damages even lethal
to the user and the forfeiture of the guarantee.
m The manufacturer declines any responsibility for damages
caused to people or things due to non-compliance with
these instructions or if the apparatus is unreasonable
used.
Do not dispose of power tools into household waste!
According to the European Directive 2004/96 EC on waste
electrical and electronic equipment (WEEE) and its
incorporation into national law, power tools that are no
longer suitable for use must be separately collected and sent
for recovery in an environmental- friendly manner.
Old appliances contain valuable materials that can be
recycled. Please arrange for the proper recycling of old
appliances. Batteries, oil, and similar substances must not
enter the environment. Please dispose of your old
appliances using appropriate collection systems.
UK
CE Declaration of conformity
We declare under our sole responsibility according to EG
2006/42/EG, that this product is in conformity with the
following standards or standardization documents.
Product: Wet and dry vacuum cleaner
Type: P81/2 WD
Applied harmonized standards
CE LVD / CE EMF+EMC
EN 60335-2-69: 2009
EN 60335-1: 2012
EN 61000-3-3: 2008
EN 61000-3-2: 2006+A1: 2009+A2: 2009
EN 55014-2: 1997+A1:2001+A2: 2008
EN 55014-1: 2006+A1:2009+A2: 2011
EN 62233: 2008
DiBO NV
Hoge Mauw 250, 2370 Arendonk (Belgium)
6 / 2014
Pierre Van den Borne
Managing Director
I 7
Safety English