- ページ 34

バーチャルリアリティヘッドセット HTC Vive CosmosのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HTC Vive Cosmos 38 ページ。
HTC Vive Cosmos にも: クイック・スタート・マニュアル (5 ページ), はじめに (2 ページ)

HTC Vive Cosmos ユーザーマニュアル
34
Headset and headphones
Attaching the cable guides to the headset band
To use your own earphones with VIVE Cosmos, you'll need the replacement kit for earphones.
For details on how to order the kit, contact customer care.
Before plugging in your earphones, you need to attach the audio cable guide and headset cable
guide to the headset band. The cable guides are included in the replacement kit for earphones.
Before you attach the cable guides, make sure to remove the on-ear headphones from the
headset band, including the front pad and side cushions. For details, see
ear headphones from the headset band
Use a cross-shaped screwdriver (PH00) to attach the screws.
1. Audio cable guide
2. Rubber pad
3. Screws
4. Side cushions
5. Headset cable guide
6. Cable stopper
1.
On the right side of the band, place the audio connector between the rubber pad and audio
cable guide. Align the holes on the band, rubber pad, and audio cable guide, and then
screw in place.
2.
On the left side of the band, align the headset cable guide holes with the holes on the
band, then screw in place. Make sure that the headset cable passes through the headset
cable guide. The stopper on the headset cable must also be placed on the visor side of the
cable guide.
3.
Reattach the front pad and side cushions to the headset band. Make sure that each side
cushion is aligned with the curvature on the band.
HTC PROPRIETARY & CONFIDENTIAL. DO NOT DUPLICATE OR DISTRIBUTE WITHOUT PERMISSION.
on page 25.
Detaching the on-