- ページ 12

バーチャルリアリティヘッドセット HTC Vive PreのPDF マニュアルをオンラインで閲覧またはダウンロードできます。HTC Vive Pre 23 ページ。
HTC Vive Pre にも：ユーザーマニュアル (28 ページ)

Unboxing

Menu button

Trackpad

System button

Status light

USB charging adapter

Tracking sensor

Trigger

Grip button

Charging the controllers

Charge each controller using the USB cable provided.

The status light shows a solid white when the controller is fully charged.

Turning the controllers on or off

§ To turn the controller on, press the System button until you hear a beeping sound.

§ To turn the controller off, press and hold the System button until you hear a beeping sound.

Attaching the lanyards to the controllers

Using the lanyards may help prevent the controllers from accidentally being dropped.

1. While holding the controller, insert the lanyard's thread from the top to the bottom hole.

2. Loop the lanyard through the thread, and then tug the lanyard to fasten it in place.

3. Place the lanyard on your wrist, and then adjust the lock to tighten the lanyard comfortably

around your wrist.

Pairing the controllers with the headset

§ Once the controllers are turned on, they will automatically pair with the headset.

The status light shows as blinking blue while the pairing is in progress. The status light turns

solid white when the controllers are paired with the headset.

§ If the pairing is somehow lost, manually pair the controllers with the headset by pressing the

System and Menu buttons at the same time.