- ページ 19
フロアマシン HTC 420 VSのPDF マニュアルをオンラインで閲覧またはダウンロードできます。HTC 420 VS 50 ページ。 Floor grinder | concrete floor sander
HTC 420 VS にも： ユーザーマニュアル (46 ページ)
ページを印刷するHTC 420 VS
4. Operation
4.1. General
The following section describes how to change tools and how to
operate the grinder. This section does not deal with the technical
aspects of grinding, such as selection of grinding tools, etc. For
choice of tools, see HTC's Product Catalogue under the Grinding
Guide tab.
Warning!
The machine may only be operated or repaired by personnel who
have completed the required practical and theoretical training
and who have read this manual thoroughly.
Warning!
Always use the machine in an environment where there is no risk
of explosion and fire. Find out and follow the relevant fire safety
regulations when grinding.
Warning!
Secure the area around the machine. No unauthorised persons
should be within a 15-metre radius of the machine. If loose objects
get under the grinding head, these may be flung out and cause
personal injury.
Warning!
Use safety equipment such as shoes with steel toecaps, goggles,
protective gloves, a mask and hearing protection.
Warning!
The machine may only be started with the grinding head lowered.
The rotating disc must be touching the floor and the right tool
must be fitted.
2.0
Operation
11