- ページ 10

フロアマシン HTC 650 HDXのPDF マニュアルをオンラインで閲覧またはダウンロードできます。HTC 650 HDX 40 ページ。
HTC 650 HDX にも：ユーザーマニュアル (48 ページ)

Introduction

10.

11.

1.8

Handling and storage

The equipment should be stored in a heated, dry area when not in use. Otherwise it may

be damaged by condensation and cold.

When lifting the grinder, lifting straps must be used. These must be attached

well-secured in the lifting eyes provided. Only use lifting straps approved for lifting

equipment.

1.9

Warning!

Always use hearing protection when using the machine.

1.9.1

Hand and arm-weighted vibration level [m/s² for HTC 650 HDX have been measured

using equipment approved in accordance with ISO 5349-1:2001. Measurement

uncertainty for the measuring equipment is given as +/- 2%.

The machine has been tested in accordance with ISO 5349-2:2001 and ISO 20643:2005

in order to identify the operations that contribute to the most frequent vibration

exposures. At vibration levels > 2.5 m/s², the exposure time should be limited in

accordance with the table below. For vibration levels > 5 m/s², immediate measures

must be taken by the employer to ensure that the exposure time does not exceed the

time specified in the table below.

Identified work conditions Measured values [m/s²] Daily permitted exposure

Grinding/polishing

Floor preparation (T-rex)

Year of manufacture

Power (kW)

Voltage (V)

Current (A)

Frequency (Hz)

Rotational speed (r.p.m.)

Weight (kg)

Address field

5,45

5,49

HTC 650 HDX

(number of hours)

6,74

6,63

3.0