- ページ 4

湿らせる Bionaire BCM3855-CN COOL MISTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Bionaire BCM3855-CN COOL MIST 9 ページ。

Bionaire BCM3855-CN COOL MIST 取扱説明書
F E AT U R E S - O P E R AT I O N S
1. Press the Power Button ( ) to turn the humidifier on,
the humidifier will run at High setting and the High
indicator light will illuminate.
2. Allow up to 30 minutes for the filter to fully absorb
water and the unit to produce the maximum moisture
output.
3. If you want to switch to the Low setting, press the Speed
Button ( ) and the Lo indicator light will illuminate.
4. To shut the humidifier off at any setting, press the Power
Button ( ) until all indicator lights go off.
Digital Humidistat Control
Your humidifier is equipped with a digital humidistat that
allows you to set your humidifier to your desired comfort
level by pressing the +/- buttons to adjust the humidity
level ranging from 45% to Stay On setting. The corresponding
Humidity Indicator will illuminate once selected. When the
room humidity level rises above the set humidity, the
humidifier will stop running. When the room humidity level
drops below the set humidity, the humidifier will turn on
automatically to maintain the preset humidity level.
NOTE: When the water tank is empty, and the base is almost
empty, you need to refill the tank. The fan will continue to
run to help dry the humidifier. Shut off and unplug the unit.
Please follow the Daily Cleaning Instructions. Refill the tank
as directed in Filling the Water Tanks Instructions.
NOTE: If moisture forms on the walls or windows, turn off
the humidifier.
Control Panel
Figure 1
Low Indicator
Light
Humidity Control Buttons
Power Button
C
F
A. Tank Handles (2)
B. Water Tanks (2)
C. LED Control Panel
D. Humidifier Housing

REPLACING THE FILTER

Through normal use, waterborne minerals and sediment
become trapped in the wick filter. The harder your water, the
greater the amount of minerals in the water, and the more
often you will need to change your filter.
Filter Life – Under normal conditions of continuous use, a
brand new filter will operate efficiently for 1 month. It is
strongly recommended that a new filter be replaced every 30
days of use.
To replace the filter, follow the steps below:
1. Remove both tanks from the unit and allow humidifier to
operate for 30-40 minutes to consume water in the tray
and in the filter. This will reduce water spillage when
removing the filter.
Humidity Indicator Lights
High Indicator
Light
Speed Button
A
B
D
E
G
E. Filter Support cap
F. Front Door
G. Wick Filter