- ページ 2

照明器具 EasyPro Cabrio CLED4のPDF 取扱説明書、安全性、保証についてをオンラインで閲覧またはダウンロードできます。EasyPro Cabrio CLED4 4 ページ。 Color changing led light

ページを印刷する

Installation of LED Light (continued)

4. Use with or without removable base to fit fixture into desired location. If

base is used it may need to be ballasted to prevent fixture from shifting.

5. Run wire from LED fixture back towards control module and power source.

6. Join the light to the control module by connecting

the 4-prong quick plug, tighten the retention ring to

ensure a secure connection. (Figure 1) Do not sub -

merge connection or control module.

7. Join the control module to the transformer by

connecting the 2-prong quick plug and tighten the

retention ring. (Figure 2)

Note: Power supply must be maintained to control

module or light will default back to mode 1 on start -

up (transformers with automatic operation will reset

the control module back to default on each start

due to power interruption.)

8. Plug the transformer into a GFCI outlet.

9. The LED light will default to mode 1 on initial startup. Use CLEDRC remote

to sync multiple Cabrio fixtures together, change modes, brightness and

speed.

Remote Control Operation

•

A single remote can operate multiple Cabrio fixtures in any combination

within its range.

Depress mode, brightness and speed buttons slowly and deliberately to

•

ensure all light fixtures remain in sync on the same cycle.

•

Desired setting must be achieved by clicking remote functions, holding a

button down will not change settings.

•

CLEDRC remote requires an A23 battery (included).

Power on/off

Slower Speed

Lower Brightness

Change Mode Backwards

Red (mode 21)

Blue (mode 23)

(remote control sold separately)

Figure 1

Figure 2

Reset Defaults (mode 1)

Faster Speed

Raise Brightness

Change Mode Forwards

Green (mode 22)

White (mode 27)

A23 battery included