- ページ 14

ディスクアレイシステム easyRAID ERP12S-10GR2のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。easyRAID ERP12S-10GR2 19 ページ。

ERP12R/S & ERP16R/S

Mounting the RAID System

The RAID system/Rail Extenders can be installed in a standard 19-inch rack. Follow the procedures below:

1. Adjust the 4 screws making sure that correspond

with the mounting points on the rails.

2. Adjust the length of the rails as needed.

4. Tighten the lock screws. (If necessary, install the

extenders to move RAID system out a little.)

3. Secure the rails using two nuts and bolts on both

the front and back posts of the rack.

5. Slide the RAID system into the rack and secure it

into place using the fixing screws.