- ページ 7

ディスクアレイシステム easyRAID ERP12S-8FR2のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。easyRAID ERP12S-8FR2 19 ページ。

without prior written permission.

Important Safety Instructions, Care and Handling

Before starting with the RAID installation, read this user manual carefully and save it for later reference.

Do not place the RAID system near a radiator or other heat source.

Slots and opening are for ventilation. Never block or cover them.

Do not place the RAID system near water or any liquid.

Protect the RAID system from extremely high or low temperatures.

Keep the RAID system away from magnetic objects.

Keep the RAID system away from dust, sand, or dirt.

Place the RAID system on a stable area. Protect the RAID system from being dropped or

mishandled.

Ensure that the RAID system voltage corresponds to the supply voltage.

If an extension cord or power center is used with the RAID system, make sure that the total current

consumption plugged into the wall outlet does not exceed the ampere rating.

• This power cord will only fit into a grounded type of power outlet.

• Unplug the power cord from the wall outlet before cleaning or servicing.

• Unplug the power cord from the wall outlet and refer to qualified service personnel under the

following conditions:

- If the RAID system has been exposed to water or any liquid.

- If the RAID system has been dropped or the casing damaged.

Do not place the RAID system where the power cord may be stepped on.

•Do not remove the cover.

•Do not attempt to service the RAID system yourself. Opening or removing the cover may expose

you to dangerous voltage or other risks.

Preface