- ページ 6
エアクリーナー Bionaire BAP360XL-WTのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Bionaire BAP360XL-WT 8 ページ。
ページを印刷するBAP360XL-WT_22EM1 (US).pdf 6 2022/8/9 下午2:56
H O W T O R E P L A C E T H E T R U E H E P A
F I L T E R
1.
The filter replacement indicator light and air quality indicator will flash and air quality sensor
indicator change to red when it's time to replace the filter.
2.
Turn OFF and unplug the air purifier.
3.
Locate the filter cover on the bottom of the unit.
4.
Rotate the knob counterclockwise to remove the cover and expose the filter (Figure below).
5.
Remove and discard the filter and re-insert a new filter (Figure below).
6. Re-align the filter cover and turn the knob clockwise to close.
7.
Plug the unit and turn the power ON.
8.
To reset the filter status on the air purifier, press & hold the filter replacement button for 3
seconds. The filter icon will Flash 3 times and then go off.
9
Information on where to purchase replacement filters can be found on our website at
www.bionaire.com.
WARNING: Only use the original Bionaire filter model BAPF361 / BAPF361-2PK specially intended for
this appliance. Do not use any other filters.
A I R Q U A L I T Y S E N S O R M A I N T E N A N C E
Open the small door compartment and use a vacuum cleaner for about 10 seconds at the lowest speed
setting.
It is recommended to do this once every two months.
Step 1.
Open the air quality sensor cover.
Step 2.
Clean air quality sensor, air inlet, air outlet and lens with vacuum cleaner.
Step 3.
Reattach the air quality sensor cover.
10