- ページ 2

リモコン EasyRest PREMIER 2.0のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。EasyRest PREMIER 2.0 2 ページ。 Wireless

PREMIER MODEL 2.0

REMOTE CONTROL - WIRELESS

Should you need to order a replacement remote control for your bed, or, on the rare occasion

that the remote control loses communication with the base unit, you will have to perform this

simple operation to allow the remote to communicate with your base unit.

For Single Beds (Twin, Full, Queen, One-Piece King)

Unplug the power cord to the base unit from the outlet. (For one piece king units unplug

both base units) Wait 30 seconds. Plug base back into outlet. (For One Piece King plug both

bases back into outlets at the same time.) Press and hold Head Up and Foot Up buttons for 2

seconds. (DO NOT PRESS ANY OTHER KEYS ON REMOTE DURING THE PAIRING PROCESS) Let

go of the buttons and wait 2 seconds then test the bed by raising the head.

For Dual Beds (Split Queen & Split King)

Unplug the power cord to both bases from the outlets. Wait 30 seconds.

Remote 1 - Plug the power cord to base A back into the outlet. DO NOT plug base B into

the outlet at this time. Press and hold Head Up and Foot Up buttons for 2 seconds. (DO NOT

PRESS ANY OTHER KEYS ON REMOTE DURING THE PAIRING PROCESS) Let go of the buttons

and wait 2 seconds then test the bed by raising the head. Leave the bed plugged into the

outlet.

Remote 2 - Plug the power cord to base B into the outlet. Press and hold Head Up and Foot

Up buttons for 2 seconds. (DO NOT PRESS ANY OTHER KEYS ON REMOTE DURING THE PAIRING

PROCESS) Let go of the buttons and wait 2 seconds then test the bed by raising the head.

*Once the base unit is plugged into the outlet you have 3 minutes to complete the pairing process for each

base unit.

If you have followed these directions and are still having difficulty you can reach our Customer Service Department

at 1-800-523-5383 Monday - Friday from 9 am to 5 pm (East Coast Time).

Drawing 1: