- ページ 7
ホームオートメーション Dickert E19のPDF 取付・取扱説明書をオンラインで閲覧またはダウンロードできます。Dickert E19 8 ページ。 Wireless receiver
ページを印刷する7.4.
Selecting modes of operation /functions
Mode of op-
Programming
eration
Pulse
Press the programming key 1x
briefly
Press the transmitter key for 3 s
Surge current Press the programming key 2x
briefly
Press the transmitter key for 3 s
Specific on
Press the programming key 3x
briefly
Press the transmitter key for 3 s
Specific off
Press the programming key 4x
briefly
Press the transmitter key for 3 s
7.5.
Programming the switch off timer
The output is automatically switched off after the selected time.
Information / Instructions
Switch off timer operation is only possible in the operating mode "Surge current" or "Specific on"!
Example: The output should switch off after 3 minutes.
1. Teach a transmitter button with the function "Surge current" or "Specific on", see Points 7.3 and 7.4.
2. Briefly push the programming key 6 x (LED blinks 6 x - Pause - blinks 6 x - Pause - etc.)
3. Now wait the desired switch off time, here 3 minutes.
4. Finally, activate the desired (already taught) transmitter key.
5. The switch off time is now programmed.
Information / Instructions
In the operating mode "Specific on" the time is restarted by reactivating. It can be prematurely
switched off using "Pulse", "Surge current" and "Specific OFF". The time is teachable in
ond intervals in the range of 1 second to approx. 18 hours.
The active timer operation is displayed by blinking of the LED.
7.6.
Deleting the timer
1. Briefly push the programming key 6 x (LED blinks 6 x - Pause - blinks 6 x - Pause - etc.)
2. Now activate the programming key again for approx. 3 seconds (LED lights up - goes out)
3. The switch off time is now deleted.
7.7.
Deleting transmitters
1. Activate programming key for approx. 5s (LED lights- flickers- goes out)
2. All taught transmitters are now deleted! Deleting individual transmitters is not possible.
28506100_E19_EN_2012-08-07_EN.docx
LED display
blinks 1x – pause - blinks 1x,
etc.
flickers
blinks 2 x – Pause - blinks 2 x,
etc.
flickers
blinks 3 x – Pause - blinks 3 x,
etc.
flickers
blinks 4 x – Pause - blinks 4 x,
etc.
flickers
Receiver E19
sec-
7 / 8