- ページ 9

ヒーター Dickinson NEWPORTのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dickinson NEWPORT 19 ページ。 Diesel heater
Dickinson NEWPORT にも：設置および操作マニュアル (10 ページ), 操作・設置マニュアル (16 ページ)

ページを印刷する

FUEL - OIL FLOW ADJUSTMENT

Refer to Oil Metering Valve diagram (Page 5)

The height of the valve-adjusting knob will determine the quantity of oil exiting from the valve outlet. The oil

flow adjustment can be made when checking the oil flow (as above) or when the heater is operating.

Requirements -

Procedure

OIL METERING VALVE

OVERFLOW

line and the valve.

FLAME-OUT

will shut-off the flow of oil into the burner. Oil will accumulate in the burner to a depth of 5/8 ins

before the shut-off occurs. THIS OIL MUST BE REMOVED BEFORE RE-LIGHTING.

HIGH TEMPERATURE

fusible sleeve. This fuse will melt if the valve knob reaches a temperature of 165 degrees F.

shut-off the flow of oil into the burner. . Under normal conditions the valve is at room temperature. If

the high fire sleeve melts it indicates too much heat in the valve compartment. THIS IS CAUSED BY

INCORRECT OPERATING PROCEDURES. THE FLAME MUST BURN ABOVE THE BURNER

RING AT ALL TIMES. If this occurs a replacement part is available from Dickinson.

DO NOT LEAVE YOUR HEATER BURNING UNATTENDED

5/64th ins allen wrench

On top of the valve knob - insert the allen wrench into the adjusting

screw.

Turn counterclockwise and remove the small jamming set screw.

Set the valve knob at #1

Re-insert the allen wrench into the adjusting screw.

Turn the allen wrench counterclockwise to decrease the fuel flow and

clockwise to increase the fuel flow. We suggest no more than half turn

adjustments each time until the desired flow rate is achieved.

Replace the jamming set screw. Prevent movement of the adjusting screw,

which you have just set, by holding it.

is designed to prevent to much oil from entering the burner should there be dirt in the

- If the flame is extinguished with the oil metering valve open the float in the valve

- The adjusting screw on the knob of the oil metering valve s fitted with a

SAFETY FEATURES

This will