- ページ 4

データロガー Dickson HT125のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Dickson HT125 12 ページ。 High-temp logger operation

ページを印刷する
Dickson HT125 マニュアル

Getting Started

•
Install the DicksonWare™ Software.
•
Connect the cable (supplied with the software) to the logger and to a working serial port on your
computer.
•
Click the Setup button. When the setup window appears, all fields should be automatically filled in,
this will confirm that DicksonWare™ has recognized the logger. Should all fields remain blank, refer to
"No Communication" in the Trouble Shooting section of this manual. Once DicksonWare™ recognizes
the logger, press the Clear button. This will delete all data currently stored.
•
The logger is now sampling and ready for use. The default sample interval is 1 minute. You may
choose to change Default settings for sample interval and start-date and time. When changing
these settings, the logger will automatically go through the clear process to accept your changes.
Note: To conserve battery life when storing unit, press the Setup button and select the shortest Sample
Interval and Stop When Full in the Samples section. Do not expose download cable to temperatures above
175˚F
*WARNING*
Fire, explosion and server burn hazard. Do not recharge, disassemble, heat above 145˚C, incinerate, or
expose battery to water.
Rev. 07/07