- ページ 4
ボイスレコーダー Dickson TH6P3のPDF はじめにをオンラインで閲覧またはダウンロードできます。Dickson TH6P3 7 ページ。 Remote sensing temperature/humidity recorder
PENS
PENS
PENS
PENS
The blue pen has a longer pen arm and records humidity. The red pen has a shorter arm and
records temperature. The pens are offset to allow the red pen to glide under the blue pen. The
blue pen indicates the correct time and the red pen precedes it by 3/16 of an inch.
POWER
POWER
POWER
POWER
The TH6 operates on AC power with an optional 4AA battery backup. Depending on chart
rotation selected and model; battery backup will last approximately 3 days.
Note: Alarm will not operate under battery only power.
LED Indicators
LED Indicators
LED Indicators
LED Indicators
• AC Power with Battery Backup - Solid Green
• AC Power with Low Battery or No Battery - Blinks Red
• Battery Only - Blinks Green
• Battery Only (Low Battery) - Solid Red
PEN
PEN HOME ADJUST
PEN
PEN
HOME ADJUST
HOME ADJUST
HOME ADJUST
If over time the pen location does not match the display, you may need to adjust the pens
location on the chart. A Pen Home Adjustment will not affect calibration of the sensor, but rather
corrects for the natural drift that occurs with mechanical moving parts over time.
1. While the unit is on, press and hold both Pen Home
2. Both pens will move to the outer edge of the chart, and then the shorter red
3. If the red pen tip does not line up with the outer chart ring line, use the Adjust
4. Once the shorter red pen is set, press Pen Home
5. If the blue pen tip does not line up with the outer chart ring line, use the Adjust
6. Once the blue pen is set, pressing the Pen Home
7. Each time P P P P en
Note: Pressing the On/Off button will exit the adjustment and return the unit to normal operation.
Each time the Pens Home or On/Off button is pressed, the adjustment currently in progress will
be stored. The unit will take one minute to exit Pens Adjust Mode once the On/Off button is
pressed.
Dickson TH6P Manual V5 052418
1.800.561.8187
solid green. Release the Pen Home
Pen Home and On/Off
Pen Home
Pen Home
green for one second then the LED will turn off.
Note: Press Pen Home
Note:
Pen Home first so the unit will not turn off
Note:
Note:
Pen Home
Pen Home
move to the outer chart ring (maximum temperature/RH line).
Adjust- - - - Down
Adjust
Down buttons (on the back of the unit) to move the red pen so that the pen tip is
Adjust
Adjust
Down
Down
on top of the outer chart ring.
longer blue pen to the out chart ring line.
Adjust
Adjust- - - - Down
Down buttons to move the blue pen so that the pen tip is on top of the outer ring
Adjust
Adjust
Down
Down
line.
the outer edge of the chart and the shorter red pen will move to the outer chart ring line.
en H H H H ome
en
en
ome is pressed the two pens will switch positions (moving the most
ome
ome
recently adjusted position) until On/Off
www.
Pen Home
Pen Home
Pen Home and On/Off
On/Off
On/Off
On/Off buttons until the LED is
On/Off buttons. The LED will flash amber and
On/Off
On/Off
Pen Home to switch pen positions moving the
Pen Home
Pen Home
Pen Home button will move the longer blue pen to
Pen Home
Pen Home
On/Off is pressed to exit pen adjust mode.
On/Off
On/Off
4
.com
red
red pen will
red
Adjust- - - - Up
Adjust
Adjust
Up and
Up
Up
Adjust- - - - Up
Adjust
Adjust
Up and
Up
Up